CR-5000 enables an interactive workflow between logical circuit engineering and board layout. CR-5000’s placement and routing tools are optimized for speed and accuracy, enabling you to tackle today’s complex PCB design challenges.
Board Designer gives you powerful and straightforward control over interactive routing – vital for dense PCBs with complex power distribution and test point requirements.
To design an electronic product right-the-first-time and meet tight delivery deadlines you need a seamlessly integrated design environment that supports electronic system design and analysis, PCB layout and verification, and production preparation.
Zuken has partnered with the leading MCAD system suppliers to develop ECAD/MCAD codesign tools which facilitate the interactive integration of ECAD and MCAD systems, enabling true concurrent mechanical, electrical and electronics design.
Working in 3D for the first time, Renishaw’s PCB designers noticed a host of benefits, including fixing housing fit issues upfront and easier component placement.
ARBURG is one of the world‘s leading manufacturers of injection molding machines. Through its central development and production processes at the company’s headquarters in Lossburg, Germany; they guarantee the high quality standard for which ARBURG products are famous the world over. That‘s why they use the best tools, such as Zuken‘s CR-5000 software, in the development department.
Endress+Hauser standardizes PCB engineering and production processes for industrial measurement products across distributed locations.- Read more...
Rohde & Schwarz manages variants with increased efficiency using Zuken’s CR-5000 suite. In a sophisticated design flow, the schematic provides a master data set that drives all PCB assembly variants.
Engineers continue to embrace programmable logical devices within their product designs in numerous applications across a wide range of industries. With FPGAs incorporating embedded processors, memory blocks and DSP functions, they are an attractive, low-cost option for many designs.
A new approach to autorouting for users of CR-5000.
The XDF Viewer from Zuken is a web browser based tool that allows departments to view and verify current design data and associated errors performed by the CR-5000 ADM checks against the board data created by CR-5000 Board Designer and the manufacture panel data generated by CR-5000 Board Producer.
Zuken’s CR-5000 Board Designer is an intuitive, integrated environment for designing PCBs, BGAs and MCMs. With support of 3D utilities and viewers for HDI and advanced packaging, Board Designer offers one solution for all board technology needs.
Zuken, provider of the state-of-the-art CR-5000 PCB design and verification platform, has recently partnered with leading MCAD system provide Dassault Systemes, integrating Zuken’s interactive PCB design functionality within
Dassault’s CATIA V5 solution.
Board Modeler bridges the process between the MCAD and the ECAD design flow by offering a common platform to communicate between the two disciplines.
The production of accurate manufacturing data is critical in achieving rapid time-to-market and the highest possible product quality.
Design Gateway is Zuken’s platform for logical circuit design and verification of single and multi-board system-level electronic designs.
The use of common library data throughout the whole design cycle is an essential element of the CR-5000 constraints-driven, right-by-construction methodology.
As an integral part of the CR-5000 tool suite, Lightning is the key to getting rapid, accurate results, coupled with first-rate Signal Integrity and EMC.
Lightning Verify offers a complete concurrent and post-layout signal integrity solution that enables engineers, layout designers and specialists within a development team to collaborate, organize, constrain, and verify their design in a seamless process.
Lightning Power Integrity Advance provides fast and practical power integrity and electromagnetic interference analysis within the real-time PCB design flow.
Board Viewer allows users to share and review native design information to enhance communication during product development. Board Viewer supports native design data from the following: CR-5000 Board Designer (.pcb, .pnl), Footprint data (.ftp), CR-8000 Design Force (.dsgn)
Component Editor (.ftp), CR-8000 DFM Center (.fpr) CR-8000 DFM Elements (.mdgn).
Download ready-made PCB Footprints and quickly adapt them to your own layer stack following the straightforward guides supplied.
Import Simulation Kits into CR-5000 Lightning products that support them with just a few mouse clicks
NOTE: Download only available from within page above.
Zuken is partnering with major component vendors to provide easy access to a large variety of simulation models to verify the Signal Integrity of high-speed interconnect
NOTE: Download only available from within page above.
Read what the world is saying about CR-8000 and CR-5000.
- Read more
Register to access Zuken.com downloads, or login to your existing account.
This white paper covers how the shift to modular design bridges the gap between development and things, revolutionizing hardware design.
This white paper article looks at each of the roles of the engineer and PCB designer,
considers the traditional design process, and makes suggestions on how the designer
can contribute significantly to improving a design’s overall signal integrity while
simultaneously saving time so that the engineer can focus on more in-depth issues.
Mixed-signal and multi-technology simulation within the CR-5000 design environment
This White Paper investigates what approaches exist for increasing engineering productivity, and identifies steps that can be taken to find a better balance between engineering management tasks and effective use of engineering development time.- Read more...
Download the new industry study by research and analyst firm techconsult.- Read more...
View webinar library