Resources by

Stay on the leading edge of PCB, electrical and data management technologies

78 results found
  • Press Release
September 15, 2021
Zuken and Vitech Announce Co-Located Industry Events

Zuken USA and Vitech to host co-located industry events in 2022 in San Antonio, TX. Zuken Innovation World and Vitech Integrate will have a common focus on Digital Engineering.

Read now
  • Press Release
August 03, 2021
E3.series 2021 Release makes Control Cabinet and Wire Harness Engineering Faster, Easier and More Dependable

E3.series 2021 from Zuken delivers enhancements for connector handling, 3D control cabinet design and ECAD/MCAD collaboration.

Read now
  • Press Release
July 07, 2021
Zuken’s CR-8000 2021 Advances Early Design Analysis and Reuse Functionality

CR-8000 advances system-level PCB design with significant enhancements in analog simulation, SI analysis, and intelligent layout and routing

Read now
  • Press Release
May 12, 2021
Vitech’s GENESYS 2021 Brings Increase in Analytical Power to Model-Based Systems Engineering

GENESYS™ 2021 is the latest version of its model-based systems engineering development platform. This release brings a range of added features that enhance efficiency, accuracy, and flexibility—all in the service of greater analytical power for the engineer.

Read now
  • Press Release
March 29, 2021
Pre-configured solution for the management of electrical and fluid projects

With the DS-E3 StarterPackage, Zuken introduces a preconfigured feature set of its DS-E3 data management software, specifically designed to manage E3.series projects.

Read now
  • Press Release
March 04, 2021
Zuken adds GENESYS MBSE Technology to Portfolio

Model-based systems engineering adds a vital element to Zuken’s Digital Engineering Strategy — Following the acquisition of the US based MBSE specialist Vitech Corporation and the formation of Zuken Vitech in 2019, Zuken has now officially added Zuken Vitech’s GENESYS MBSE 2.0 technology into its European sales and service portfolio.

Read now
  • Press Release
November 19, 2020
Zuken and Electro Magnetic Applications Collaborate on EMI Reduction

Zuken Inc., and Electro Magnetic Applications, Inc. (EMA) have entered into a partnership to improve the accuracy of cable harness simulation models for complex electrical subsystems in aircraft and vehicles

Read now
  • Press Release
October 20, 2020
Zuken extends E3.series with new applications for paperless wiring and assembly

E3.AssemblingCockpit, E3.WiringCockpit and E3.WiringChecks provide operators on the shop floor with all information required for assembling, wiring, and start-up checks in a paperless form via portable terminals.

Read now
Zuken extends E3.series with new applications for paperless wiring and assembly
  • Press Release
July 28, 2020
eCADSTAR Release 2020

eCADSTAR Release 2020.0 now available with new modules for SI, PI and IBIS-AMI Simulation

Read now
Zuken’s new internet connected PCB design platform, eCADSTAR now include signal integrity, power integrity and IBIS-AMI simulation
  • Press Release
July 16, 2020
E3.series 2020

E3.series 2020 delivers significant enhancements for tabular editing, document embedding, and 3D PDF support

Read now
Usability, Tabular Editing, and 3D Cabinet Layout
  • Press Release
June 16, 2020
CR-8000 2020

Key development themes for CR-8000 2020 are superior design efficiency, comprehensive system-level design and verification, and support for the latest advancements in packaging technology.

Read now
FPGA optimization, skew group routing, back-drilled vias, electro-mechanical co-design,flex-rigid PCBs, multi-domain analysis, tile bump, 3D wire desi...
  • Press Release
May 05, 2020
Smart Cabinet Building Initiative

Leveraging the opportunities of digitalization in control cabinet manufacturing together with customized, integrated solutions: To achieve this objective, Weidmüller, Komax, Zuken and Armbruster Engineering founded the "Smart Cabinet Building" initiative in April 2020.

Read now
Weidmüller, Komax, Zuken and Armbruster Engineering launch the "Smart Cabinet Building" initiative for new solutions in electrical cabinet manufactur...
  • Press Release
December 18, 2019
eCADSTAR Advanced High-Speed launched

Zuken announces the launch of eCADSTAR HS adding high-speed design capabilities to its new internet-connected PCB design platform.

Read now
  • Press Release
October 16, 2019
New Solution for Electromechanical Product Development

A new standard interface module links Zuken’s DS-2 platform to CONTACT Elements

Read now
  • Press Release
September 30, 2019
Zuken Connects to Dassault Systèmes’ 3DEXPERIENCE Platform

New V6 Community Membership agreement paves the way for end-to-end electronic system design and manufacturing processes within the 3DEXPERIENCE platform

Read now