Resources by

Stay on the leading edge of PCB, electrical and data management technologies

227 results found
  • Press Release
July 28, 2020
Zuken announces the availability of eCADSTAR release 2020
Press Release
  • Press Release
July 16, 2020
Zuken Announces E3.series 2020
Press Release, Electrical and Fluid Design, E3.panel+, 2D/3D cabinet layout and routing
  • Press Release
June 30, 2020
Enhanced System-level Engineering and Physical Design Efficiency in CR-8000 2020
Press Release
  • Success Stories
June 18, 2020
Ontec Success Story

Ontec uses CR-8000 to develop a next-generation product in less time despite rigorous design constraints

Read now
  • 2020 Technical Webinars
June 05, 2020
Ansys - Optimizing Hardware Layout Designs

This webinar showcases how a leading-edge hardware design process bridges the challenging gaps that occur between analysis and layout design.

Read now
  • 2020 Technical Webinars
May 26, 2020
Hardware Architecture Optimization to Improve Your Product Design

This webinar will explore the architecture optimization process using functional design, PCB planning, space planning, and parametric targets. Learn how architecture optimization can improve your product design quality.

Read now
  • 2020 Technical Webinars
May 18, 2020
High-Speed Design and Analysis Using CR-8000

This webinar will explore a high-speed design process in CR-8000 that utilizes a constraint browser, topology template, crosstalk estimation, signal and power integrity simulations.

Read now
  • 2020 Technical Webinars
May 14, 2020
CR-8000 2020 Release Update

In this session, we will review some of the new features that have been added in the CR-8000 Design Force and offer some explanation of how these additions will benefit our customers within their design flows.

Read now
  • Press Release
May 14, 2020
Zuken Announces New Release of Harness Builder for E3.series

Harness Builder 2020 for E3.series reduces time to manufacture and improves design accuracy with new features for auto-placement of labels, entering pre-defined cable lengths, cable tolerancing, and additional support for third-party testing and manufacturing equipment.

Read now
  • 2020 Technical Webinars
May 11, 2020
E3.series 2020 Release Update

This webinar will introduce the new functionality in E3.series 2020 and summarize some of the more important existing functions in this industry-leading design solution.

Read now
  • Press Release
May 04, 2020
Vitech Releases GENESYS 2020 with Enhanced Capability for Model-Based Systems Engineering

Vitech has released GENESYS™ 2020, the latest version of its model-based systems engineering development platform.

Read now
  • 2020 Technical Webinars
April 30, 2020
Harness Builder 2020 Release Update

In this webinar, we will introduce all the new functionality for 2020 Harness Builder for E3.series and summarize some of the more important existing functions in the tool.

Read now
  • 2020 Technical Webinars
April 27, 2020
MBSE for Wire Harness Design

This webinar will discuss the challenges and best practices of creating a model for the purpose of wire harness and Electronic Control Units (ECU’s) implementation.

Read now
  • 2020 Technical Webinars
April 17, 2020
Anark Visual Collaboration Enhances Zuken Digital Engineering

This webinar will explore the Digital Thread within the Digital Engineering process.  The Digital Thread is the communication foundation underlying the collaboration and decision-making processes.  With a focus on electrical and electronic design processes, this webinar will consider how the Digital Thread can support an MBSE based design process including design review and requirement verification.

Read now
  • 2020 Technical Webinars
April 17, 2020
Paperless Engineering with E3.WiringChecks and E3.WiringCockpit

Paperless engineering improves accuracy, traceability, and schedule.  Communication gaps riddle engineering companies, and E3.series tools E3.WiringChecks and E3.WiringCockpit is here to facilitate communication between design, checking, commissioning, technicians, and all parties involved after the initial design.  Engineering design is only as good as the downstream stakeholders who check, build, and verify it, and these tools ensure everyone’s input is implemented accurately and completely.

Read now
  • 2020 Technical Webinars
April 15, 2020
Simplify MCAD Integration for Wire Harness Design

Do you need to move data back and forth between your MCAD and harness design tools and processes?  Design processes that span multiple tool domains require design data to move from one domain to the other to resolve and verify design elements. But, moving data between the two domains can be problematic.  This webinar will look at the challenges and solutions for bridging MCAD and wire harness design.

Read now