Wire Harness Manufacturing Software Evaluation

Harness Builder for E3.series is a powerful yet easy to use tool based on the proven E3.series toolset from Zuken. Created for harness manufacturers, it produces a synchronized BOM, harness drawings, wire lists and a quote all in one sheet.

Harness Manufacturers can now easily create their harness documentation from drawings and/or a wirelist in a short amount of time. Datasheets can be easily added to the documentation. Pricing information, lead time and assembly time can also be calculated automatically.

Evaluation only available in North America

Reasons to Consider E3.series

Design Physical Panels and Cabinets

Working in either 2D or 3D, E3.panel allows engineers to layout components inside panel enclosures. Intelligent automatic snapping points allow parts to be easily placed in their correct location, and with keep-out and height restrictions shown in 2D and 3D, it is also possible to prevent clashes. The ease-of-use means electrical engineers can leverage an electrical environment to complete their panel design.

Optional Panel Wire Routing

To ensure the electrical engineer can complete the entire electrical design, there is an optional auto-routing module for E3.panel. Because signal logic is transferred from the schematic, all the wires can be shown in the panel and the wires can be automatically routed through ducts in the panel, taking into account the shortest route and any segregation requirements. Duct fill capacity is controlled and checked. The length of each wire is calculated and with dedicated links to wire preparation machines wires can be cut stripped, crimped and marked automatically.

Easy To Use

Easy Access

No software installation of licenses to worry about

Step-by-step Tutorial

Learn about E3.series cable design with hands-on guides

Technical Support

You'll have access to Zuken support during your test drive

Our common customers will immediately benefit from this new export capability in a Cirris tester compatible format. They will no long have to input the same data into both systems, saving significant time. By linking Zuken’s Harness Builder for E3.series with Cirris Systems’ harness test products, we can deliver a more comprehensive solution to the harness manufacturing industry.
– Kevin Ellsworth,
Product Manager

Start Now