Resources by

Stay on the leading edge of PCB, electrical and data management technologies

80 results found
  • Press Release
September 14, 2021
Zuken and Vitech Announce Co-Located Industry Events

Zuken USA and Vitech to host co-located industry events in 2022 in San Antonio, TX. Zuken Innovation World and Vitech Integrate will have a common focus on Digital Engineering.

Read now
  • Press Release
August 03, 2021
E3.series 2021 Release makes Control Cabinet and Wire Harness Engineering Faster, Easier and More Dependable

E3.series 2021 from Zuken delivers enhancements for connector handling, 3D control cabinet design and ECAD/MCAD collaboration.

Read now
E3.series 2021 from Zuken delivers enhancements for connector handling, 3D control cabinet design and ECAD/MCAD collaboration.
  • Press Release
July 07, 2021
Zuken’s CR-8000 2021 Advances Early Design Analysis and Reuse Functionality

CR-8000 from Zuken advances system-level PCB design with significant enhancements in analog simulation, SI analysis, and intelligent layout and routing

Read now
  • Press Release
June 08, 2021
Zuken USA Announces Cloud Storage for E3.series

Zuken USA announces cloud storage for the E3.series suite of products with the introduction of Cloud Vault for E3.series.

Read now
Zuken USA announces cloud storage for the E3.series suite of products with the introduction of Cloud Vault for E3.series.
  • Press Release
May 11, 2021
Vitech’s GENESYS 2021 Brings Increase in Analytical Power to Model-Based Systems Engineering

Vitech has announced the release of GENESYS™ 2021, the latest version of its model-based systems engineering development platform. This release brings a range of added features that enhance efficiency, accuracy, and flexibility—all in the service of greater analytical power for the engineer.

Read now
  • Press Release
May 06, 2021
eCADSTAR Release 2021.0 Connects Electronic Engineering with PCB Design
Press Release, Zuken USA
  • Press Release
April 20, 2021
Zuken Announces Industry’s First Model-Based Wire Harness Design Process

Zuken announces the industry’s first model-based wire harness design process. E3.GENESYS Connector transfers and exposes the model to the implementation team utilizing digital engineering best practices.

Read now
Zuken announces the industry’s first model-based wire harness design process. E3.GENESYS Connector transfers and exposes the model to the implementa...
  • Press Release
March 24, 2021
Zuken USA Announces Plans for Zuken Innovation World Digital Edition

Zuken USA announces plans for fully virtual annual conference: Zuken Innovation World – Digital 2021. ZIW will offer participants opportunities for networking, learning, and innovation through a mix of technical classes, discussion rooms, one-on-one appointments, and live Q&A.

Read now
  • Press Release
December 08, 2020
Zuken USA Announces Partnership with Delta Sigma Company

Zuken’s Harness Builder for E3.series now has direct integration to drive Delta Sigma Company’s ProjectionWorks for easy wire harness design and manufacturing.

Read now
Zuken’s Harness Builder for E3.series now has direct integration to drive Delta Sigma Company’s ProjectionWorks for easy wire harness design and m...
  • Press Release
November 04, 2020
Vitech’s GENESYS 2020 R2 Brings Enhanced Diagramming Capability for Model-Based Systems Engineering

Vitech has announced the release of GENESYS™ 2020 R2, the latest version of its model-based systems engineering development platform. This release builds on its diagramming capability, making it best-in-class combining autogeneration of diagrams with zero maintenance and rich formatting.

Read now
November 3, 2020 — BLACKSBURG, Va. — Vitech has announced the release of GENESYS™ 2020 R2, the latest version of its model-based systems enginee...
  • Press Release
October 20, 2020
Zuken extends E3.series with new applications for paperless wiring and assembly
Press Release, E3.WiringSystem Lab, Electrical and Fluid Design
  • Press Release
July 28, 2020
Zuken announces the availability of eCADSTAR release 2020
Press Release, Zuken
  • Press Release
July 16, 2020
Zuken Announces E3.series 2020
Press Release, Electrical and Fluid Design, E3.panel+, 2D/3D cabinet layout and routing
  • Press Release
June 30, 2020
Enhanced System-level Engineering and Physical Design Efficiency in CR-8000 2020
Press Release
  • Press Release
May 14, 2020
Zuken Announces New Release of Harness Builder for E3.series

Harness Builder 2020 for E3.series reduces time to manufacture and improves design accuracy with new features for auto-placement of labels, entering pre-defined cable lengths, cable tolerancing, and additional support for third-party testing and manufacturing equipment.

Read now