Electrical and Wire Harness Design Products A-Z
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
E³.cable
E³.cable is for the development of electrical systems and their internal connectivity. It is an integrated, logic-oriented solution for complete documentation of wiring, cables and wire harnesses. With E³.cable, block diagrams can be created, which provide an overview of all electrical and electronic elements.
E³.fluid
E³.fluid is a complete solution for designing and documenting circuit diagrams for hydraulic, pneumatic and cooling systems. With E³.fluid, all the required documents for subsequent production and user documentation are created.
E³.formboard
E³.formboard is for the creation of nailboard documentation required in producing wire harnesses and cable assemblies.
E³.Functional Design
E3.Functional Design is for early design planning of wire harness systems. Block diagrams are created and connected through specified communication channels as functional units with their signal properties are placed in the drawing. Wiring diagrams can be automatically created from the functional diagrams using E3.Wiring Diagram Generator.
E³.panel
E³.panel is for the development and documentation of panels and cabinets. The 3D information of the cabinet and components documents the placement and routing of wires. E³.panel enables you to work in 2D or 3D mode.
E³.redliner
E3.redliner enables you to capture and document modifications made during installation of machines and heavy equipment as an overlay to the original design. As machines and heavy equipment are assembled and tested on site, they often require you to carry-out modifications. Documenting this can be time consuming. E³.redliner simplifies this process ensuring consistent documentation of the final product and in the field.
E³.Saber Frameway
E³.Saber Frameway integrates Synopsys’ Saber simulator with E³.series. This enables design engineers to create right-the-first-time robust wire harness and fluid designs, helping them address growing project complexity and time/quality constraints through early access to simulation results.
E³.schematic
E³.schematic is a complete solution for designing and documenting circuit diagrams for electrical systems. With E³.schematic, all the required documents for subsequent production and user documentation are created. Circuit diagrams can be created for electrical and fluid engineering either separately or in combination with each other.
E³.topology
E³.topology is a complete solution for distributing components in the system and evaluating harnesses and sub-harnesses. E³.topology is integrated with E³.cable and supports the developer from the first sketches to the complete schematic drawing. On scaled sheets the target system is outlined, the possible installation spaces defined and the valid connection pathways between installation spaces are created. Later, the connections generated will contain all the wires and cables belonging to one harness.
E³.viewerPlus
E³.viewerPlus is an intelligent viewer designed to integrate directly with dedicated after-sales and service systems, enabling you to directly retrieve electrical and fluid design data. E³.viewerPlus allows you to search for relevant design data – through standard functions like highlighting, signal tracking and printing.
E³.Wiring Diagram Generator
E³.Wiring Diagram Generator automatically generates wiring diagrams for development and after-sales service. It can also be used to migrate and create standardized diagrams from older systems. After defining the diagram placement and routing rules, wiring diagrams are generated automatically from a netlist.