Controlling the Release Points for Your PLM/PDM System

Controlling the Release Points for Your PLM/PDM System


There is one thing that all design engineers will agree on: creating and gathering all the required data for PLM is error-prone and can be a royal pain. We all understand the value of releasing our design data to the corporate PLM system but our design process dictates multiple release points, and each one has a different purpose and data requirements.

Checkpoint or Milestone Releases to PLM

release-to-manufacturing-rocket-1There are multiple times during the design process when design data should be packaged and placed in the PLM system.  The most frequent release type is a daily or weekly checkpoint. This entails packaging up the data for archival purposes.  Another common release type is driven by a milestone such as a design review.  Design reviews can be done through the PLM system given the number of potential stakeholders. This require a release package that contains schematic and board viewables and a current BOM at a minimum. Specifications, simulation results and various other documents may need to be provided based on the review type. When the review is completed, mark-ups, instructions and BOM changes need to be passed back to the design team.

Release to Manufacturing

The release to manufacturing process can come in at least three flavors: prototype, first article and full production builds. A release to manufacturing PLM package contains the schematic and PCB viewables plus the entire fabrication package for the board. Depending on your manufacturing process, your list could include fabrication outputs such as drill, ODB++, Gerber, fabrication and assembly drawings and of course a BOM.

These release points occur repeatedly throughout the design process and the release package content generation is typically a manual process..

Common Pitfalls

  • common-pitfall-1Are we sure that the design files used to generate the outputs are the latest version?
  • Are the board, schematic and EBOM in sync?
  • Are there procurement or lifecycle issues with any of the components used in the design?
  • Have there been recent footprint updates that need to resolve?
  • Have I produced all the required outputs?
  • Is my process repeatable?

There’s a Better Way

An advanced engineering data management system such as Zuken’s DS-CR has much to offer and can help solve many of these issues. By incorporating vaulted work-in-progress (WIP) design data, you can overcome many of the more common pitfalls in the process:

  • Ensure that the correct design files are in play. The WIP vault keeps the latest version current.
  • Add approval controls to your design data. Design data can be reviewed and approved prior generating release packages.
  • Provide an audit trail; you will always know who did what and when.

ds-cri-logo-1DS-CR’s intelligent EBOM is directly related to the schematic and board layout. These items are checked and kept in-sync throughout the design and release process. The EBOM is directly tied to your corporate component library allowing you instant visibility into any possible component lifecycle issues.

Document generation is automated and works directly on your vaulted design data. It is template-driven ensuring that each release point has all the necessary outputs.

Object-based notifications will inform you of changes that might impact the integrity of your design. Here are a few examples:

  • A component library part changed after the schematic was last vaulted.
  • There has been a footprint change after the board was last vaulted.
  • There has been a schematic change after the board was last vaulted.
  • The EBOM and schematic have been modified by different people.

As you can see, engineering data management systems such as DS-CR are essential to ensuring a smooth transition between your design process and PLM release points. The fact that you can fully trust content and source data will lower your risk and just might let you sleep better tonight.

Shawn Larson
Shawn Larson
Senior Technical Fellow
Shawn Larson is one of the technical leads for DS product line working primarily on data management implementations. He helps customers to get the right design data in the right place at the right time. Shawn enjoys good jazz, classic rock and all seasons in New Hampshire's White Mountains.
  • Webinare
Juni 30, 2022
Smart Cabinet Building: Kommissionieren - Etikettieren - Montieren

In diesem Webinar zeigen wir, Ihnen, wie mit Hilfe von Digitalisierung und Automatisierung die Prozessschritte "Kommissionieren, Etikettieren und Montieren" Einsparungen von bis zu 60% pro Prozessschritt erwirtschaften können.

Jetzt registrieren
Live Webinar: 27. Juli 2022, 10 Uhr CET
  • Presse-Information
Juni 13, 2022
eCADSTAR Release 2022 ermöglicht effiziente Erstellung von IoT-fähigen PCB-Designs

Mit dem Release 2022 von eCADSTAR entwickelt Zuken das erfolgreiche Konzept eines benutzerfreundlichen, mit dem Internet verbundenen PCB-Designsystems für das Segment der kleinen und mittleren Unternehmen konsequent weiter.

Read now
  • Webinare
Juni 09, 2022
Smart Cabinet Building: Der Einstieg in die vollautomatische Kabelkonfektionierung – die neue Zeta 620

In diesem Webinar zeigt Ihnen unser Smart Cabinet Building Partner Komax welche Vorteil das neue Komax Modell Zeta 620 bietet und wie Sie damit Prozesse im Schaltschrank optimieren und somit Aufwand und Kosten bei der Produktion einsparen.

Jetzt registrieren
  • Blog
Juni 08, 2022
Was ist vor der Einführung von MBSE zu beachten?

Das modellbasierte Systems-Engineering ist in den letzten Jahren auf ein wachsendes Interesse gestoßen und wird häufig als Methode zur Beherrschung von komplexeren Systemen und zur Beschleunigung des Produktentwicklungsprozesses angepriesen. Die zunehmende Komplexität von cyber-physischen Systemen in modernen Maschinen und Anlagen hat die Verbreitung in vielen verschiedenen Branchen vorangetrieben. In diesem Blog erfahren Sie alles, was Sie vor der Einführung von MBSE beachten müssen.

Read now