Resources by

Stay on the leading edge of PCB, electrical and data management technologies

95 results found
  • Webinar
August 18, 2021
Managed Services: Running your Engineering IT Environment in the Cloud

As more organizations look to move their engineering IT to the cloud, we will present our essential guidelines and lessons learned to help you define your strategy to achieve your desired goals and plan for a sustainable migration.

Watch Now
  • Webinar
August 18, 2021
IC Power Module Design with CR-8000 Design Force

The typical design flow for a power module is in MCAD, where only structural analysis is possible. Moving to a new design flow using CR-8000 Design Force also allows for electrical analysis too. This webinar will demonstrate the features and benefits of this new design flow.

Watch Now
  • Webinar
August 18, 2021
PCB Creepage Checking According to IPC Standards

Failing to adhere to Electrical insulation requirements could prevent your product from being released. Zuken's CR-8000 constraints management and safety standard checking tools can help you meet the required IPC standards.

Watch Now
  • Webinar
August 13, 2021
Solving LPDDR4 Technology Design Challenges

In this presentation you will be introduced to the necessary steps in constraining and validation of LPDDR4 on the basis of a real design realized in CR-8000 Design Force right first time.

Watch Now
  • Webinar
July 09, 2021
Digital Continuity – Engineering PDM and PLM Integration Strategy

Zuken supports a best-in-class approach to enable a flexible digitalization strategy. In this presentation we will provide an introduction of Zuken's PDM and PLM integration strategy and an overview of certified process integrations with leading PDM environments.

Watch Now
  • Webinar
July 09, 2021
Defining and Implementing a Configurable Product Architecture – Webinar

A methodical approach to defining an optimal degree of variance before committing to detailed design in Zuken’s CR-8000 and E3.series.

Watch Now
  • Webinar
July 09, 2021
PCB Design Change Workflow with CIM Database, CR-8000 and DS-CR

In this webinar, you will learn how a change request initiated in Contact Software flow through into CR-8000 and DS-CR then back to CIM Database

Watch Now
  • Webinar
July 08, 2021
PCB Version Control and PLM with Zuken DS-CR and PTC Windchill

In this webinar, you will learn how a change request initiated in PTC Windchill will trigger a modification of the wiring harness design in CR-8000 and DS-CR

Watch Now
  • Press Release
July 07, 2021
Zuken’s CR-8000 2021 Advances Early Design Analysis and Reuse Functionality

CR-8000 advances system-level PCB design with significant enhancements in analog simulation, SI analysis, and intelligent layout and routing

Read now
  • Webinar
July 06, 2020
Practical Signal Integrity for improved EMI Control in PCB Design

In our webinar we will provide an introduction to the challenges of signal integrity and the underlying physical effects. This will provide the basis for practical tips to address the related challenges during PCB design.

WATCH NOW
  • Case Study
June 30, 2020
ONTEC

ONTEC faced a difficult challenge: develop a multimedia broadcasting product while complying with a customer’s electromagnetic interference requirements, all within a tight development schedule. ONTEC used Zuken’s CR-8000 with Keysight’s ADS (including SiPro) to meet the requirements of the challenge

Read now
ONTEC uses CR-8000 to develop a next-generation product in less time despite rigorous design constraints
  • Press Release
June 16, 2020
CR-8000 2020

Key development themes for CR-8000 2020 are superior design efficiency, comprehensive system-level design and verification, and support for the latest advancements in packaging technology.

Read now
FPGA optimization, skew group routing, back-drilled vias, electro-mechanical co-design,flex-rigid PCBs, multi-domain analysis, tile bump, 3D wire desi...
  • Webinar
June 07, 2020
DS-CR smart working library management

This webinar will give a brief overview of the data management platform  DS-CR and show how it can be utilized to ensure that CR-8000 libraries continue to be managed to support models of remote working.

WATCH NOW
  • Webinar
June 04, 2020
Constraint Specification in CR-8000

In this webinar the use of the Rule Stack Editor and Clearance Class in conjunction with the Constraint Browser will be explained step by step.

Read now
  • Webinar
May 04, 2020
Engineering Requirements of IoT Devices

In recent years, the design of Internet of Things products became a major topic of interest. But mostly when discussing IoT aspects, the focus is on the software/application and the business-model side, neglecting the fact that PCBs are the core of - almost - every IoT device, with dedicated requirements for the design and analysis process.

Read now