Resources by

Stay on the leading edge of PCB, electrical and data management technologies

74 results found
  • Webinar
September 14, 2020
EMC for PCB Designers

In this presentation, an EMC minded PCB design approach is presented, allowing designers to understand which EMC rules will apply to PCB projects and how EMC analysis capabilities can be utilized in the CAD flow to reduce the risk of EMC compliance failure once the board is manufactured.

Read now
  • Webinar
September 04, 2020
Engineering Requirements of IoT Devices

In recent years, the design of Internet of Things products became a major topic of interest. But mostly when discussing IoT aspects, the focus is on the software/application and the business-model side, neglecting the fact that PCBs are the core of - almost - every IoT device, with dedicated requirements for the design and analysis process.

Read now
  • Webinar
July 06, 2020
Practical Signal Integrity for improved EMI Control in PCB Design

In our webinar we will provide an introduction to the challenges of signal integrity and the underlying physical effects. This will provide the basis for practical tips to address the related challenges during PCB design.

WATCH NOW
  • Case Study
June 30, 2020
ONTEC

ONTEC faced a difficult challenge: develop a multimedia broadcasting product while complying with a customer’s electromagnetic interference requirements, all within a tight development schedule. ONTEC used Zuken’s CR-8000 with Keysight’s ADS (including SiPro) to meet the requirements of the challenge

Read now
ONTEC uses CR-8000 to develop a next-generation product in less time despite rigorous design constraints
  • Press Release
June 16, 2020
CR-8000 2020

Key development themes for CR-8000 2020 are superior design efficiency, comprehensive system-level design and verification, and support for the latest advancements in packaging technology.

Read now
FPGA optimization, skew group routing, back-drilled vias, electro-mechanical co-design,flex-rigid PCBs, multi-domain analysis, tile bump, 3D wire desi...
  • Webinar
June 07, 2020
DS-CR smart working library management

This webinar will give a brief overview of the data management platform  DS-CR and show how it can be utilized to ensure that CR-8000 libraries continue to be managed to support models of remote working.

WATCH NOW
  • Webinar
June 04, 2020
Constraint Specification in CR-8000

In this webinar the use of the Rule Stack Editor and Clearance Class in conjunction with the Constraint Browser will be explained step by step.

Read now
  • Webinar
May 04, 2020
Advanced IC Packaging and Co-Design with Design Force
Webinar, Design Force Advanced Packaging, CR-8000
  • Case Study
November 22, 2019
Testimonials - CR-8000

A collection of testimonials from satisfied CR-8000 customers

Read now
A collection of testimonials from satisfied CR-8000 customers
  • Webinar
November 15, 2019
How to be First to Market with DDR5!

DDR5 is the latest generation of memory. In this joint webinar with Keysight Technologies, we’ll begin with pre-layout simulation, then transition to CR-8000. The design will then be verified by Electromagnetic (EM) simulation and system simulations in Keysight ADS, in order to build confidence in the final DDR5 design.

WATCH NOW
  • Press Release
May 22, 2019
Zuken joins the UCLA CHIPS consortium
Press Release, Design Force Advanced Packaging
  • Webinar
December 12, 2018
Releasing Your Design to PLM is more Complicated than You Thought

This webinar will discuss the different release profiles from work-in-progress to a manufacturing-centric PLM system followed by the demonstration of best practices that can make the job easier and more reliable.

WATCH NOW