Search Results for: PCB
355 results found
- Blog
June 15, 2017
Predictive Failure Analysis Can Improve Product Quality - Part 1 of 2
I recently talked on predictive failure analysis at the PTC LiveWorx 2017 conference. There was a lot of audience interest, so I thought I’d share some of the things I discussed.
Read now
The good news is that more and more devices are becoming part of the Internet of Things (IoT), which extends the design team’s visibility beyond...
- Blog
November 13, 2017
Toshiba – RF Module Shrink (TransferJet™)
Toshiba faced a difficult design problem: their TransferJet™ technology was embedded in a customer cell phone, and when the next rev of the phone came around, they learned that they needed to shrink the board from 8mm x 8mm to 4.5mm x 6mm, and they had to shrink the module thickness from 1.7mm to 1.0mm...
Read now
Toshiba faced a difficult design problem: their TransferJet™ technology was embedded in a customer cell phone, and when the next rev of the phon...
- Blog
March 01, 2018
Lower Manufacturing Costs with XJTAG’s New Design Gateway Plugin
XJTAG has partnered with Zuken create a new plugin for Design Gateway and is offering it free of charge. The plugin, called XJTAG DFT Assistant, helps to validate correct JTAG chain connectivity, while displaying boundary scan access and coverage onto the schematic diagram through full integration with Design Gateway.
Read now
XJTAG has partnered with Zuken create a new plugin for Design Gateway and is offering it free of charge. The plugin, called XJTAG DFT Assistant, h...
- Blog
March 22, 2018
Mastering Power Integrity: First Get Your Power Distribution System Right
I don’t think I’m generalizing when I say that designers working on complex high speed designs really don’t want to expend a lot of time and effort dealing with power integrity problems. And they especially don’t want to do it using tools that are detached from their design flow. In today’s complex PCBs, we’re talking advanced processors, complex FPGAs and superfast memories, which all share various voltage ranges.
Read now
I don’t think I’m generalizing when I say that designers working on complex high speed designs really don’t want to expend a lot of time and...
- Products
October 26, 2018
E3.cable
E3.cable extends the functionality of E3.schematic enabling individual conductors to be combined together in the design to form cables and harnesses.
Read now
Wiring design and documentation
- Products
January 02, 2019
DFM Elements
Fabrication and Assembly Drawing Creation
- Products
January 03, 2019
Simulation and Analysis
CR-8000 includes fully-integrated simulation and analysis tools to verify all aspects of your single or multi-board designs
Read now
Integrated simulation and analysis tools
- Blog
March 16, 2021
Tech Tip: Creating and Verifying a System Circuit Diagram for Multi-Board Design in CR-8000
In part 1 of this series, I introduced the different methods for multi-board design in CR-8000. In most cases, the design starts with a system circuit diagram. Today you'll learn how to create and verify one in CR-8000.
Read now
- Products
July 13, 2021
CR-8000 Release 2021 What's New
The CR-8000 2021 release features more than 150 enhancements across the tool suite ranging from architectural planning, system-level schematic design and verification, 3D multi-board and advanced packing layout
Read now
- Press Release
July 07, 2021
Zuken’s CR-8000 2021 Advances Early Design Analysis and Reuse Functionality
CR-8000 advances system-level PCB design with significant enhancements in analog simulation, SI analysis, and intelligent layout and routing
Read now
- Blog
October 11, 2021
Finally Back to Live Events
After a pandemic break, this year's FED Conference took place as a live event last week in Bamberg. The conference is a gathering for the German-speaking electronic and PCB-related industry for more than 25 years, circulating across various cities in Germany and stopping this year in the charming city of Bamberg.
Read now
- Blog
March 03, 2021
The Difference between ECAD and MCAD
Electronics and mechanics are two of the most important areas of modern engineering. ECAD and MCAD are the generic names for software solutions that support the virtual design of electronic and mechanical systems in products. The integration of ECAD and MCAD design information and design processes is essential for the development of advanced electro-mechanical products
Read now
- Blog
December 11, 2023
Top 5 Blogposts of 2023
As we close the chapter on 2023, let’s take a stroll down memory lane and check out the posts that really captured your attention this year. Join us for a ride through the highlights and insights that made this year all that it was.
Read now
- Blog
February 13, 2025
The Future of Augmented Reality
Our new post explores the potential of augmented reality (AR) to transform everyday experiences in shopping, education, and navigation. It highlights how enhanced AR devices will offer immersive, interactive environments that blend the virtual and physical worlds.
Read now
- Case Study
January 20, 2022
EREMS
EREMS, a French enterprise specializing in the design and realization of high-tech electronic equipment and of associated software for Space, Defense, and Aeronautics uses CR-8000 and DS-CR from Zuken for the design and lifecycle management of flight electronics, ground electronic equipment, and test benches.
Read now
- Products
October 01, 2018
DFM Center
With a robust set of features for data preparation and embedded verification to verify manufacturing specifications, DFM Center addresses the challenges of the manufacturing process.
Read now
PCB Design for Manufacturing