Tech Tip: How to Simulate Analog Circuit Design in Design Gateway

Menu

This video shows how users can simulate and analyze an analog circuit design in the CR-8000 Design Gateway interface with the PSPICE simulation tool.

By setting up an Analog Simulation Library, users can access the Analog Simulation Manager. This enables them to create the analysis setup, insert analysis settings, and create a netlist based on schematic data. Design Gateway automatically transfers analysis conditions to PSPICE simulator to run the simulation including viewing results.

tunirdey
tunirdey
Applications Engineer for CR-8000
Tunir Dey was serving as an Applications Engineer for CR-8000 products at Zuken Inc. Tunir worked closely with customers in system-level schematic design using Design Gateway, PCB layout design using Design Force, constraint management, topology development, SI, PI, and EMC analysis. Before joining Zuken, Tunir used to serve as a Product Engineer intern in one of the major EDA companies and was responsible for RF, Microwave, high frequency, and high-speed simulation. Tunir graduated from Purdue University with an MS in Electrical Engineering (RF and Microwave) and an MBA in Finance from Indiana University.
  • Blog
November 05, 2020
Printed circuit board shot into space

Since 2012, the FED has been honoring outstanding designers with the PCB design award. One of this year's winning designs was even into space.

Read now
  • Blog
September 29, 2020
Tech Tip: How to Register a Command for the Tool List in CR-8000 Engineering Desktop

Many Designers are always asking Zuken how they can create their own user commands that will appear in the Tool List when doing a Right Mouse Button Click on a design under settings in the Engineering Desktop. User commands can be created and listed. This can be accomplished with minimal effort. It will be the designer’s responsibility to create a script that will be listed on the tool list.

Read now
  • Webinar
September 14, 2020
EMC for PCB Designers

In this presentation, an EMC minded PCB design approach is presented, allowing designers to understand which EMC rules will apply to PCB projects and how EMC analysis capabilities can be utilized in the CAD flow to reduce the risk of EMC compliance failure once the board is manufactured.

Read now
  • Blog
September 10, 2020
Powerful SI/PI/EMI PCB Simulation Environment Reduces Analysis Time by 86%

What do you do if your next project is high speed, with exceptionally stringent EMI requirements, and has to be complete in less time than you’ve ever developed a product before? When the Ontec team found themselves facing that predicament, they turned to Zuken. Why?

Read now