Resources by

Stay on the leading edge of PCB, electrical and data management technologies

303 results found
CR-8000 System Planner - pcb hardware architecture design
  • White Paper
October 20, 2018
End-to-end hardware architecture design and validation
White Paper, System Planner
A new approach to creating design architectures
3D-pcb-multi-board-600x200px-510x200
  • Webinar
October 20, 2018
3D PCB Multi-board Design Basics – Don’t Fall Behind
Webinar, Design Force
Chip Package Board co-design
  • White Paper
October 20, 2018
3D Convergence of Multi-board PCB and IC Packaging Design
White Paper, Design Force, Chip-Package-Board Co-Design, Design Force Advanced Packaging
Combine chips and boards in new configurations
Electroflight will use E3.series to help design an all-electric aircraft.
  • Press Release
October 17, 2018
E3.series for all-electric aircraft research initiative
Press Release, Wire Harness Engineering, Ensure Your Business Responsiveness, by Emerging Technologies, Manufacturing and Service Documentation
iot-modular-912-510x310
  • White Paper
October 12, 2018
The Internet of Things and Modular Design
White Paper, CR-8000
How the rise of IoT can lead to changes in the design process
release-to-manufacturing-process-1600-300-510x300
  • Webinar
October 12, 2018
Does the Release to Manufacturing Process Keep You up at Night?
Webinar, CR-8000, DS-2
KRONE integrates ECAD, MCAD and ERP to enable integrated design and sourcing
  • Case Study
October 10, 2018
Krone

KRONE, a major brand in the agricultural machinery market, implemented an interdisciplinary product development process. Using Zuken’s E3.series, KRONE linked ECAD, MCAD and ERP to develop an integrated digital engineering and sourcing process, achieving sizable benefits for both sourcing and service. With an integral representation of mechanical and electrical product information, KRONE was able to make solid progress in implementing its major business optimization strategies: Industry 4.0 and Farming 4.0.

Read now
Krone Agricultural Machinery integrates ECAD, MCAD and ERP to enable integrated design and sourcing
endress-hauser-production-550x342-510x310
  • Case Study
October 01, 2018
Endress+Hauser

With PCB data and process management solutions from Zuken, Endress + Hauser has standardized development and manufacturing processes across five geographically-distributed operations, enabling company-wide parts standardization, design-reuse and increased engineering productivity.

Read now
Endress+Hauser standardizes PCB engineering and production processes for industrial measurement products across distributed locations
FlexiRigid_bend2-510x310
  • Webinar
September 26, 2018
Improve Flex PCB Manufacturing Productivity with Better DFM Checks
Webinar, Design Force, ADM – Advanced Design for Manufacture
Free PCB Design Software - Download CADSTAR Express today
  • Software Evaluation
September 26, 2018
Free PCB Design Software – CADSTAR Express
Software Evaluation
Try CADSTAR today - all the core functionality of CADSTAR 2020...
toshiba-transfer-jet-813x492-510x310
  • Case Study
September 26, 2018
Toshiba

Toshiba faced a difficult design problem: their TransferJet™ technology was embedded in a customer cell phone, and when the next rev of the phone they needed to shrink the board and the module thickness. On top of that, they had to add RF matching to simplify the adoption of the module. Toshiba used Zuken’s CR-8000 Design Force with ANSYS analysis tools to accomplish the project.

Read now
significantly reduce product size with 3D chip, package, board co-design.
Board specification from CR-8000 Design Force is exported to Speedstack.
  • Press Release
August 21, 2018
Polar Speedstack PCB Stackup Interface
Press Release, Design Force, DFM Center, Design Force Advanced Packaging
wire harness design with the electrical design software from zuken
  • Press Release
July 24, 2018
E3.series 2018 addresses complexity challenge
Press Release, E3.panel, DS-E3, E3.fluid, E3.formboard, E3.cable
how to design a printed circuit board
  • Press Release
July 11, 2018
CR-8000 2018 Boosts Process Efficiency
Press Release, Design Gateway, Design Force, Chip-Package-Board Co-Design, DFM Center
man-binoculars-viewer-600x200px-510x200
  • Software Viewer
July 09, 2018
CADSTAR Design Viewer Software
Software Viewer