Businessman-holding-in-hand-a-global-connectioncommunications-1024x450

Zuken Design Service Providers

Menu
125 results found

CAD Byrån AB (CAD Byran AB)

CAD Byran is a service bureau with long experience in PCB design, 20 years 2008.  Our goal is One design is enough. We ...

CAD Byran is a service bureau with long experience in PCB design, 20 years 2008.  Our goal is One design is enough. We avoid auto routers.  We work mostly with swedish and norwegian customers.

http://www.cadbyran.se/
Kanalhuset, HALLSTAHAMMAR, 734 40, SWEDEN
Jan Erik Fallberg
+46 (0)220 10230
CADSTAR
Covering:
Sweden

LAISENSE electronics

LAI Sense electronics More than classic HW development: EMC MTBF-prediction, dFMEA, FTA, failure analysis Product suppor...

LAI Sense electronics

More than classic HW development:

EMC
MTBF-prediction, dFMEA, FTA, failure analysis
Product support
Newdesign of old parts / spare parts
Cost optimization of product

Fast turn around

http://www.laisense.com/
Rördromsvägen 12, Borensberg, 59029, SWEDEN
Mr. Johan Moleklint
+46 (0)703 45 55 89
CADSTAR
Covering:
Sweden

Kentronics Engineering Services & Supplies

N0.51, Bukit Batok Crescent,, Unity Centre, #06-05, 658077, Singapore
Kenny Lee
+65 (0)6565 6428 / 6565 6923
+65 (0)6565 6144
CADSTAR
Covering:
Singapore

Linearworks

Linearworks Corporation was established on October 1, 2004 by Daisho Denshi Co. Ltd. Linearworks Corporation designed Pr...

Linearworks Corporation was established on October 1, 2004 by Daisho Denshi Co. Ltd. Linearworks Corporation designed Printed Circuit Boards (PCB) products based on users needs worldwide, at the same time expanding its market-wings locally within the Philippines. On October 2004, the Division was registered under the Philippine Economic Zone Authority (PEZA) bearing its new company name as Linearworks Corporation.

Linearworks expertise includes design layout in; High Speed Digital Designs, Mixed Signal Technology, Analog Designs, RF Designs & Advance Packages (CSP, BGA, MCM, Flip Chip, etc.)

https://www.linearworks.net/
(Map location is approximate), Unit 1604 Summit One Office Tower, 530 Shaw Boulevard, Mandaluyong City, The Philippines
+63 (0)2 532 0819
+63 (0)2 531 0344
CR-5000
Covering:
Philippines

MDS CIRCUIT TECHNOLOGY INC

MDS Circuit Technology, Inc. is a PEZA-recognized Printed Circuit Board Design (PCB Design) and Printed Wiring Board Des...

MDS Circuit Technology, Inc. is a PEZA-recognized Printed Circuit Board Design (PCB Design) and Printed Wiring Board Design (PWB Design) company in the Philippines, Southeast Asia. Founded in 2001 under Japan-based MD Systems Co. Ltd, MDS Circuit Technology, Inc. continually strives to improve and evolve to provide cheap, cutting-edge PCB and PWB design with top notch Japan quality and fast delivery to meet customer satisfaction

http://www.mds-ct.com/
9th Floor Net One Center, 3rd Avenue cor. 26th Street, Bonifacio Global City, Taguig , 1630 , Philippines
+63 (0)2 818 0527
+63 (0)2 818 0531
CR-5000
Covering:
Philippines

NewCad as

Experienced PCB Design Bureaux serving mostly Norwegian customers, but open for export orders. Do all kinds of design, a...

Experienced PCB Design Bureaux serving mostly Norwegian customers, but open for export orders. Do all kinds of design, analog, RF, digital and power, specialized in signal and power integrity. Our designers are IPC certified, and have many years experience regarding system design, manufacturing and industrialization of electronics.
– Postal address: P.O.Box 96, NO-3321 Vestfossen

http://www.cadpit.com/
Hestehagan 2, Vestfossen, NO-3320, Norway
Bjørn Gjerstad
+47 (0)9750 7222
CADSTAR
Covering:
Norway
  • Design Bureau

CADPIT

Hestehagan 2, 3320 Vestfossen, Norway
Bjorn Gjerstad
+47 (0)9750 7222
CADSTAR
Covering:
Norway

VIRO

VIRO is een ingenieursbureau met 600 medewerkers in 8 vestigingen in Nederland, Duitsland en Oostenrijk. Onze Marktsegme...

VIRO is een ingenieursbureau met 600 medewerkers in 8 vestigingen in Nederland, Duitsland en Oostenrijk.

Onze Marktsegmenten:
Aerospace
Automotive
Machinebouw
Metaal- en Zware Industrie
Chemie en Petrochemie
Elektrotechniek en Halfgeleiderindustrie
Defensie

Onze Diensten:
Projectmanagement
Maakbaarheidsstudies
Conceptontwikkeling
Mechanisch Constructie
Elektrotechnisch Constructie
Berekeningen (CAE/CFD)
Cable Routing (Elektrisch/Pneumatisch)
Basic Engineering
Detail-Engineering

Onze Tools:
CAD Software
NX (Teamcenter)
SolidWorks
Creo (Windchill)
PDMS
CATIA V5
CAE/CFD Berekeningssoftware
Nastran, ANSYS, Abaqus
Hypermesh / HyperWorks / OptiStruct
Cable Routing
E3.series (Zuken)
SABER / KABI
EPLAN / ELCAD

Contactpersonen:
Ir. Wim Oosterwijk
Programma Manager
Tel: +31 (0)650 121 447
Email: w.oosterwijk@viro.nl

Ir. Rupert Janssen
Business Development Manager
Tel: +31 (0)653 390 705
Email: r.janssen@viro.nl

https://www.viro-engineering.com/
Newtonweg 3, 6101 WX Echt, Postbus 33, 6100 AA Echt, Netherlands
Ir. Wim Oosterwijk
+31 (0)650 121 447
E3.series
Covering:
Netherlands

Q.P.I. Group B.V.

The Q.P.I. Group offers PCB design services since 1996 either from its facilities in Helmond or on the premises of the c...

The Q.P.I. Group offers PCB design services since 1996 either from its facilities in Helmond or on the premises of the customer in the Netherlands or Belgium. Besides design services Q.P.I. offers also a wide range of PCB technologies and has its own laboratory and model shop to support its customers.

http://www.qpigroup.com/de/kontakt
Schootense Dreef 27, HZ Helmond, 5708, Netherlands
Huub Speetjens
+31 (0)492 590059
CADSTAR
Covering:
Netherlands

WAGO Elettronica Srl

Pre-assembled terminal strips / Terminal rail assembly and wiring The terminal configuration programs of Wago are integr...

Pre-assembled terminal strips / Terminal rail assembly and wiring
The terminal configuration programs of Wago are integrated with E³.series. The bi-directional interfaces are supporting to build or verify terminal strip configurations. Within E³.series these terminal strips can be ordered and used as pre-assembled parts.

https://www.wago.com/de/
Via Vittoria, 5/b, S.Lazzaro Di Savena (BO), 40068, Italy
+39 (0)051 627 21 70
+39 (0)051 627 21 74
E3.series
Covering:
Italy
  • Design Bureau

VULCANO GIUSEPPE

Service bureau for PCB realisation and engineering.

Service bureau for PCB realisation and engineering.

Via Triumvirato 89/4, Bologna, 40132, Italy
Vulcano Giuseppe
+39 (0)51 311771
CR-5000
Covering:
Italy
  • Design Bureau

RICCA FABRIZIO

Via Biamonti, 15, TORINO, 10131, Italy
Mr. Fabrizio Ricca
+39 (0)011 81 97 403
CADSTAR
Covering:
Italy

R.S.R. S.r.l.

Research, Board Design, Prototypes, Firmware. Comprehensive solution. Used Zuken tools : CADSTAR

Research, Board Design, Prototypes, Firmware. Comprehensive solution.
Used Zuken tools : CADSTAR

http://www.rsr.it/
via Montale, 3 , Bulgarograsso (CO), 22070, Italy
Angelo Stradella
+39 (0)031 3532168
+39 (0)031 891688
CADSTAR
Covering:
Italy

STUDIO E2 srl

Progettazione ed esecuzione di master di circuiti stampati di: Industrial automation, automotive, power electronics (lin...

Progettazione ed esecuzione di master di circuiti stampati di:

Industrial automation, automotive, power electronics (linear – switching), medical devices;
small signal electronics, university research & development;
exoteric audio Hi-Fi by “tube”, consumer electronics, telecommunication devices;
electronic documentation, PCB samples.

https://www.studioe2.it/
via Bruno Buozzi 83, MODENA, 41100, ITALY
CADSTAR
Covering:
Italy

SERP S.p.A.

Circa 50 dipendenti servizio sbrogliatura realizzazione circuiti monofaccia, bifaccia, multistrato ed inoltre circuiti s...

Circa 50 dipendenti servizio sbrogliatura realizzazione circuiti monofaccia, bifaccia, multistrato ed inoltre circuiti speciali flex rigidoflex con dissipatore di calore.

http://www.serp.it
Via Statale, 15 , Burolo (TO), 36073, Italy
Antonio La Barbera
+39 (0)0125 577525
+39 (0)0125 577227
CADSTAR
Covering:
Italy
  • Design Bureau

PCB Plus Applicazioni elettroniche

Progettazione di dispositivi elettronici dall’idea al prototipo finito. Used Zuken tools : CADSTAR

Progettazione di dispositivi elettronici dall’idea al prototipo finito.
Used Zuken tools : CADSTAR

Viale San Marco, 25/6 , Venezia Mestre (VE), 30173, Italy
Massimiliano Zannini
+39 (0)041 8020555
+39 (0)041 8020555
CADSTAR
Covering:
Italy