PCB Products A-Z
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
ADM
ADM (Advanced Design for Manufacturability) is Zuken’s manufacturing DRC system, docking into CR-5000 Board Designer, and providing manufacturability checking in parallel with the layout process. ADM comes with a design rule manager and a large set of design rules for either rigid board or flexible board checking. The check results are listed in a spread-sheet-like GUI, which allows you to select each DRC warning/error and automatically zoom to the location in the layout.
Board Viewer
Board Viewer allows users to share and review native design information to enhance communication during product development. Board Viewer supports native design data from both CR-5000 and CR-8000.
Board Designer
CR-5000 Board Designer provides an intuitive, integrated environment for designing PCBs, and IC packages. It guides the user, via a common user interface, from schematic design through to floorplanning, placement and routing, analysis and into manufacturing. Rules are constant throughout the design process and can be managed anywhere in the design process to ensure flexibility and consistency.
Board Interchanger
Zuken has partnered with leading MCAD system provider Dassault Systemes to bridge the PCB design functionality of CR-5000 Board Designer with Dassault’s CATIA V5 solution. With Board Interchanger you can perform collaboration between mechanical and PCB design, making right-the-first-time products a reality.
Board Modeler / Board Modeler Lite
Zuken’s interactive 3D ECAD tool, Board Modeler, enables mechanical and electronic design collaboration. Board Modeler provides an optimized environment specifically for concurrent electronics design and mechanical verification of PCB layouts, significantly enhancing efficiency and accuracy. Board Modeler also interfaces with any MCAD system, and with supported physical verification tools.
Board Producer
The production of accurate manufacturing data is critical in achieving rapid time-to-market and the highest possible product quality. Zuken's CR-5000 manufacturing tools are tightly integrated with manufacturing to ensure that boards are manufacturable the first time. They support the latest manufacturing technologies, including build-up boards and embedded components.
CADSTAR E³.logic and E³.database
A complete and open CAD solution for the creation of circuit diagrams for CADSTAR PCB design.
CADSTAR Express
CADSTAR Express provides a quick and easy way for you to experience the basic features of our standard PCB solution. It includes all the functionality of CADSTAR 12.1, limited to 300 pins and 50 components, plus an equivalent version of P.R.Editor XR 2000.
CADSTAR FPGA Design
CADSTAR FPGA supports Actel, Altera, Lattice, Quicklogic and Xilinx flows from one universal project manager that controls all design files for simulation, synthesis, place and route and pin assignment to the PCB.
CADSTAR Library Editor
CADSTAR features extensive on-line libraries from which you can choose ready-made parts. Create additional parts with CADSTAR's easy-to-use symbol and component wizard.
CADSTAR Lite
Entry level CADSTAR bundle for less than 2,00 € / £ or $** per day
CADSTAR Schematics
CADSTAR’s schematic editor dramatically increases productivity, building in the information required in the PCB design from the beginning to create designs that are right-the-first-time. The designer is in complete control, using key elements such as schematics, variant management, FPGA integration, layout and routing environment, design re-use, and version control.
CADSTAR SI Verify
Ideal for designs where components are placed or placed and routed. If and when the nets are not routed, estimates on interconnect length and impedance are automatically considered during simulation.CADSTAR’s SI Verify uses a comprehensive and easy to use simulation library with a large range of models and standard components; IBIS models can be utilized and SPICE models for passive circuits can be loaded either.
Component Designer
All multi-pin devices, including high pin-count FPGAs and CPLDs can be created via a spreadsheet or imported manufacturers' data using a set of configurable rules. Symbols are then automatically generated based on property and pin data definitions, eliminating the need for manual drawing.
Component Manager
Components Manager facilitates parts library management. Symbols and components can be obtained from the extensive internet-accessible components library of CR-5000, and custom versions can be generated through the symbol and component wizards.
Design Force
The highest performing board design and analysis solution, Design Force supports single board, multi-board and chip-package-board interconnect analysis and optimization. Combining traditional 2D design with native 3D design and the latest human interface techniques, accelerated graphics and almost instantaneous rendering and refreshing, Design Force is the fastest, most effective PCB design solution available today.
Design Gateway
As part of a complete multi-board design flow that starts with System Planner and extends through PCB layout and manufacturing, Design Gateway forms a crucial link between initial design planning and PCB layout. Design Gateway enables the simultaneous creation and optimization of multiple PCBs, including inter-board connectivity. The complete system is represented as a hierarchical structure with unlimited levels, supporting both top-down design entry and building of blocks bottom-up.
DFM Center
DFM Center is Zuken’s manufacturing preparation and CAM solution. DFM Center manufacturing design rules can be exported into ADM for manufacturing DRC.
Dragon Router
Routing technology is no longer about intelligence alone, it focuses on strategic implementation and combines the two within a single environment that can be used by all – from engineers to specialist designers.
At the core of the Dragon Autorouter is the Routing Strategy Environment (RSE), and unlike traditional autorouting platforms it allows easy setup and control of all of the routing tools.
EMC Adviser
Identifying potential problems at the earliest stage possible minimizes the possible negative effects of design changes, reduces the overall development costs and speeds-up the design cycle.
Graphical Pin Manager
Graphical Pin Manager offers a straightforward FPGA and PCB co-design flow, from top level HDL description to schematic symbols and the physical I/O information for layout, thus reducing design cycle time and optimizing system performance. It interfaces directly with state-of-the-art FPGA design tools Altera Quartus II, Xilinx ISE, Actel Libero, and Lattice ispLEVER.
Lightning
Lightning provides a complete signal integrity simulation toolset, with the Constraint Manager at its core. Simulations for analyzing electrical behavior can be started during both schematic entry and board layout. The graphical Scenario Editor provides a scratchpad for experiments with different design strategies, while powerful parameter sweeping helps you to explore design limits and optimize circuit constraints.
P.R.Editor
Zuken has been at the forefront of routing technology for more than two decades. A combination of the world’s first graphical grid-free routing algorithm technology refined and optimized to deliver 100% routing completion, P.R.Editor XR significantly reduces your design cycle time and increase your productivity providing the options of manual, interactive and automatic component placement and routing capabilities.
Package Synthesizer
Package Synthesizer offers an intuitive, integrated environment for designing single, multi, and stacked die packages for BGA, CSP, flipchip, as well as high density, advanced technology PCBs. Package Synthesizer is an add-on module for CR-5000 Board Designer.
Power Integrity Advance
Power Integrity Advance provides fast and practical power integrity (PI) and electromagnetic interference (EMI) analysis embedded within CR-5000 Lightning, during PCB layout, within your real-time PCB design flow.
System Designer
System Designer is design capture and analysis solution for CR-5000. It supports a wide range of graphical and textual design entry methods and is suited to digital, analog, and mixed signal circuit design at both the system and the PCB level. It is tightly linked to synthesis, simulation, timing analysis and verification, throughout the design process.
System Planner
System Planner is a system-level design environment for initial planning and partitioning of electronic systems. It enables engineers to optimize form, fit and function of single and multi-board systems, maximizing design reuse and eliminating the need to re-enter upfront design planning data into the design tools during detailed design. It is the starting point for concept and design creation, linking through to detailed design, enabling engineers and designers to smoothly flow through the design process reusing, sharing and synchronizing design data.
Variant Manager
Variant Managers allow the designer to change any part of a design to match different product and international requirements, storing all the information in a single schematic design file. It also creates multiple BOMs (bills of materials) for each variant in the early stage of the product design cycle, allowing purchasing departments time to negotiate component costs.
XDF Viewer
XDF Viewer is a web browsing tool that allows departments toconduct design reviews with mark-up capabilities and import design rule check results.