Tech Tip: How to Simulate Analog Circuit Design in Design Gateway

Menu

This video shows how users can simulate and analyze Analog circuit design in the CR-8000 Design Gateway interface with the PSPICE simulation tool. By setting up Analog Simulation Library, users can access Analog Simulation Manager which enables them to create analysis setup, insert analysis setting and create netlist based on schematic and analysis conditions in Design Gateway automatically pass to PSPICE simulator and run simulation including viewing results.

Tunir Dey
Tunir Dey
Tunir Dey was serving as an Applications Engineer for CR-8000 products at Zuken Inc. Tunir worked closely with customers in system-level schematic design using Design Gateway, PCB layout design using Design Force, constraint management, topology development, SI, PI, and EMC analysis. Before joining Zuken, Tunir used to serve as a Product Engineer intern in one of the major EDA companies and was responsible for RF, Microwave, high frequency, and high-speed simulation. Tunir graduated from Purdue University with an MS in Electrical Engineering (RF and Microwave) and an MBA in Finance from Indiana University.
3D DC current view in CR-8000
  • Blog
April 18, 2024
Efficient High-Speed PCB Design with Early SI Issue Detection
cr-8000, Electronic, PCB Design, Analysis, High-speed PCB Design, PCB design, Signal Integrity, Blog
web-header-1-510x310
  • Press Release
April 10, 2024
Mark Schulman Rocks Zuken Innovation World + integrate24
Press Release, Zuken USA, Product Design and Innovation with GENESYS, E3.series, CR-8000, eCADSTAR
Differential Pair Skew Optimization
  • Blog
April 02, 2024
Tech Tip: Understanding How to Identify a Skew Group with a Differential Pair Base
cr-8000, How to..., PCB Design, Tech-Tips, CR-8000, CR-8000 Tech Tip, Diff Pair Base, Relative Length, Skew group, Blog
avoiding acid traps in PCB design
  • Blog
March 19, 2024
Tech Tip: Using ADM Checks to find Acute Angle Wiring in CR-8000 Design Force
cr-8000, How to..., PCB Design, Tech-Tips, ADM Checks, CR-8000, CR-8000 Tech Tips, Tech Tips, Blog

Related Products and Resources

eCADSTAR
  • Products
September 12, 2019
eCADSTAR

Today’s Desktop PCB Design tools require better connectivity to the outside world. eCADSTAR offers a newer level of connectivity that brings users closer to their parts providers than ever before. This allows Engineers to selected parts and drag them directly to their design. Add the additional functionality of high power Signal integrity verification and Power integrity analysis and you have the Ultimate Desktop PCB Engineering solution.

Read now
eCADSTAR
schematic capture software -PCB Placement and Routing
  • Products
October 17, 2018
CADSTAR PCB Design Layout Software
PCB Creation - CR-8000 Design Gateway
  • Products
October 01, 2018
Design Gateway

PCB Design Creation - Design Gateway is a platform for logical circuit design and verification of single and multi-board system-level electronic designs. It supports a true system-level circuit design in which individual circuits can be represented and connected as blocks.

Read now
System Level Circuit Engineering
Advanced Process-centric PCB design
  • Products
September 26, 2018
CR-8000

Building a competitive product today is much more difficult than a few years ago. Existing PCB-centric design processes are limited to a single PCB and do not provide the necessary tools for today’s competitive product development environment. PCB-centric design processes are falling behind.

Read now
Advanced multi-board PCB design software