3D Printing
- Blog
September 26, 2019
Next Generation Additive Manufacturing
Yes, it is true that even today, so many years after 3D printing started to garner attention and acclaim, rapid prototyping remains the single most common use for 3D printers. 3D printers offer the innovator advantages in the form of shorter turnaround times, improved development secrecy and greater design freedoms. But…it is also true that 3D printing isn’t going to remain as a tool for primarily rapid prototyping for much longer.
Read now
- Blog
February 07, 2019
3D Printing for Electronic and Electrical Systems
If you’ve tracked some of the hot topics in engineering over the last year, you’re likely very aware of 3D printing or additive manufacturing. This method lays down successive layers of plastic or metallic material that then fuses them together. Over time, those successive layers add up to make fully formed components...
Read now
- Blog
January 09, 2018
Self-Driving Bus is 3D Printed in Only a Few Weeks
The automobile business spends a year or two designing a new vehicle, then another year or two building tools to produce it in high volumes. Local Motors has turned that paradigm on its head with its Olli, the self-driving, electric shuttle.
Read now
Traditionally, the automobile business spends a year or two designing a new vehicle, then another year or two building tools to produce it in high...
- Blog
October 11, 2017
The Challenges of 3D PCB Designing (PCB West Interview)
During PCB West Exhibition Day, Sierra Circuits met Humair Mandavia, Chief Strategy Officer at Zuken. After his joint interview with Simon Fried, CBO of Nano Dimension, we discussed 3D PCB designing, and Zuken’s product, CR-8000 with him.
Read now
During PCB West Exhibition Day, Sierra met Humair Mandavia, Chief Strategy Officer at Zuken. After his joint interview with Simon Fried, CBO of Na...
- Blog
October 09, 2017
How to Improve Flexible Printed Circuit Manufacturing (PCB West Interview)
Sierra met Steve Watt, Manager of PCB Engineering at Zuken, during PCB West 2017 at the Santa Clara Convention Center. After his presentation on how to improve flexible printed circuit manufacturing, he shared a few tips in front of our camera. Listen to him discuss CR-8000, DfM checks, and flexible PCB designing.
Read now
Sierra Circuits met Steve Watt, Manager of PCB Engineering at Zuken, during PCB West 2017 at the Santa Clara Convention Center. After his presenta...