Resources by

Stay on the leading edge of PCB, electrical and data management technologies

27 results found
  • Case Study
November 19, 2018
Renishaw

Flexible and flexi-rigid PCBs are integral components within many of Renishaw’s products, and detailed signal integrity analysis is needed to ensure high speed digital signals can be transmitted with minimal distortion. Renishaw migrated to Design Gateway and Design Force, part of Zuken’s CR-8000 PCB design suite, primarily to help with the design and analysis of next-generation flexible PCBs.

Read now
Better fit and impedance control for complex flexible PCBs in metrology instruments.
  • Case Study
November 15, 2018
Müller Martini

Müller Martini supplies highly flexible, customized print processing machines to the graphics industry. The Swiss-based company recently took the replacement of an end-of-life CAD installation as an opportunity to re-engineer established procedures in electrical engineering and handover to production.

Read now
enhances variant and option handling and reduces manufacturing costs by moving to an object-oriented ECAD environment.
  • Case Study
November 15, 2018
Mecalac

Mecalac designs and manufactures heavy plant vehicles for use in construction. Their vehicles – backhoe loaders, site dumpers and compaction rollers – are each offered in several variants. They all need to work in harsh environments.

Read now
cuts the time taken to develop right-first-time cable harnesses for its heavy plant vehicles.
  • Case Study
November 12, 2018
Pantec Automation

When Pantec Automation’s customers faced pressure from low-cost counterfeit machinery, they realised the best way to fight back was to help customers reduce their own costs. Through wholesale efficiency improvements achieved by expanding its use of Zuken’s E3.series and integrating it into its ERP/PPS, Pantec Automation enabled its customers to better serve end-users.

Read now
cuts machine manufacturing turnaround time by around 50%, reduces product costs, and helps protect IP for its customers.
  • Case Study
November 08, 2018
BCA Leisure

BCA Leisure designs and manufactures mixed power cable harnesses for almost every UK-based OEM of caravans and motorhomes. The company has been using E3.series for a number of years and recently started using E3.cable, part of Zuken’s E3.series suite, which is now heavily relied upon during the development of 100+ different prototype harnesses each year. This is followed by provision of detailed production drawings to the shop floor.

Read Now
Using E3.series to design and manufacture cable harnesses for caravans and motorhomes
  • Case Study
October 10, 2018
Krone

KRONE, a major brand in the agricultural machinery market, implemented an interdisciplinary product development process. Using Zuken’s E3.series, KRONE linked ECAD, MCAD and ERP to develop an integrated digital engineering and sourcing process, achieving sizable benefits for both sourcing and service. With an integral representation of mechanical and electrical product information, KRONE was able to make solid progress in implementing its major business optimization strategies: Industry 4.0 and Farming 4.0.

Read now
Krone Agricultural Machinery integrates ECAD, MCAD and ERP to enable integrated design and sourcing
  • Case Study
October 01, 2018
Endress+Hauser

With PCB data and process management solutions from Zuken, Endress + Hauser has standardized development and manufacturing processes across five geographically-distributed operations, enabling company-wide parts standardization, design-reuse and increased engineering productivity.

Read now
Endress+Hauser standardizes PCB engineering and production processes for industrial measurement products across distributed locations
  • Case Study
September 26, 2018
Toshiba

Toshiba faced a difficult design problem: their TransferJet™ technology was embedded in a customer cell phone, and when the next rev of the phone they needed to shrink the board and the module thickness. On top of that, they had to add RF matching to simplify the adoption of the module. Toshiba used Zuken’s CR-8000 Design Force with ANSYS analysis tools to accomplish the project.

Read now
significantly reduce product size with 3D chip, package, board co-design.
  • Case Study
June 25, 2017
BAE Systems
Case Study, BAE Systems
BAE Systems uses CADSTAR to help reduce turret control computer wiring by 98%
  • Case Study
November 22, 2014
TEWS
Case Study, TEWS
TEWS significantly reduces development time and cost of complex high-speed PCBs using concurrent power integrity simulation.
  • Case Study
April 25, 2011
Malvern Panalytical
Case Study, Malvern Panalytical
enhance data collaboration between ECAD and MCAD, improving manufacturing data.