Menu
- Blog
June 14, 2022
Tech Tip: Support for Mesh Plane with Template Area Fill Using CR-8000 Design Force 2020 or Later
cr-8000, PCB Design, Tech-Tips, CR-8000, CR-8000 Design Force, Template Meshing, Blog
- Blog
June 02, 2022
Preparing S-parameters/Touchstone® Model for High-Speed PCB Analysis
cr-8000, PCB Design, Analysis, CR-8000, CR-8000 Design Force, High-speed PCB Design, PCB Simulation, Signal Integrity, simulation, Blog
- Blog
May 24, 2022
Tech Tip: Design Gateway ISCF file for Intel Schematic Review
cr-8000, PCB Design, Tech-Tips, check, Intel, ISCF, netlist, review, Blog
- Blog
May 19, 2022
ZIW 2022 Class Highlights: PCB Design and Data Management
Americas, cr-8000, Data management, PCB Design, ziw, CR-8000, Data Management, DS-CR, PCB design, ZIW 22, Zuken Innovation World, Blog
- Blog
May 12, 2022
5 Essential Steps for Implementing Automated Wire Processing
e3-series, Electrical, Electrical & Wire Harness, Automated Wire Processing, Design for manufacturing, E3.series, Harness Builder for E3.series, Harness Manufacturing, Wire harness design, Wire Harness Design Software, Blog
- Blog
April 28, 2022
Meet Our People: Dana, Territory Sales Manager
People, Zuken Staff, Blog
- Blog
April 21, 2022
Digital Engineering at Zuken Innovation World
Americas, Digital Engineering, Events, ziw, Digital Engineering, Digital Transformation, MBSE, Model-Based Engineering, Systems Engineering, ZIW 2022, Blog
If Digital Engineering is on your radar for adoption, research, deployment, or just curiosity, Zuken Innovation World needs to be on your radar too. W...
- Blog
April 07, 2022
Successfully Making PCB Component Substitutions
eCADSTAR, PCB Design, Component Management, eCADSTAR, Partners and Integrations, PCB design, replacement parts, Blog
Managing PCB component substitutions is a critical skill for engineers. eCADSTAR and SiliconExpert make quick work of the many options out there.
- Blog
March 31, 2022
ZIW 2022 Class Highlights: Digital Formboard and MCAD-ECAD 3D Harness Flattening
e3-series, Electrical, Electrical & Wire Harness, ziw, Digital Engineering, E3.series, ECAD-MCAD collaboration, Harness Builder for E3.series, Harness Manufacturing, Wire harness design, Blog
- Blog
March 23, 2022
How to Calculate Trace Length from Time Delay Value for High-speed Signals
PCB Design, CR-8000, Electronic, High-speed PCB Design, PCB design, Signal Speed, Trace Length, Verification and Validation, Blog
- Blog
March 22, 2022
Tech Tip: MIL Connector Placement Display Options
Tech-Tips, AERO, bottom, break-up, breakup, connector, edge, mark, MIL, mil-aero, split, symbol, top, Blog
- Blog
March 17, 2022
Is there a Model-based Engineering Process Problem? - Part 2
Digital Engineering, Digital Engineering, Digital Thread, Digital Transformation, MBSE, Blog
Connecting the product model to detailed design is Zuken's method of resolving the model-based engineering process problem. Part 2 of this blog post d...
- Blog
March 10, 2022
Routing JTAG: Ensuring a Successful Layout of Our Favorite Debug Interface
cr-8000, Electronic, PCB Design, CR-8000, JTAG, PCB, PCB design, Blog
Routing JTAG takes special consideration. Automate JTAG rules checking in CR-8000 for a successful Design for Test implementation.
- Blog
March 08, 2022
Tech Tip: DS-E3 Progress Status of Subproject
Electrical & Wire Harness, Tech-Tips, copy from, Design Reuse, Full project reuse, harnesses, interconnect, made from, milestone, phases, reuse and rename, schematics, traceability, track, Blog
- Blog
March 03, 2022
Is There a Model-based Engineering Process Problem? - Part 1
Digital Engineering, Digital Engineering, Digital Thread, Digital Transformation, MBSE, Model-Based Engineering, Blog
The most common reason for digital engineering adoption is product complexity. Not surprisingly, document-driven processes can’t handle today’s pr...
- Blog
February 24, 2022
Meet Our People: Veronica, HR Coordinator, Payroll and Benefits
People, Zuken Staff, Blog