Risorse per

Resta aggiornato sulle tecnologie PCB, elettriche e di gestione dei dati

32 risultato trovato
  • Webinar
Settembre 07, 2021
CR-8000 Mechanical Collaboration

In ambito mechatronico non è più sufficiente importare i vincoli di Progetto con Dxf, Idf, IDX che sono file intermedi. Con CR-8000 Design Force è possible la creazione della board e dei suoi vincoli dal formato native del disegno meccanico.

Guarda ora
  • Webinar
Agosto 19, 2021
Design for Test: Using TestWay to drive Digital Continuity from Design through to Production

In this webinar you will see how Design for Test (DfT) using TestWay from Aster Technologies can be integrated into a CR-8000 design flow to allow users to analyze their design at each stage of the design to delivery workflow, avoiding the traditional problems associated with traditional post-layout testing, prior to transfer of the CAD data to production.

Read now
  • Webinar
Agosto 18, 2021
IC Power Module Design with CR-8000 Design Force

The typical design flow for a power module is in MCAD, where only structural analysis is possible. Moving to a new design flow using CR-8000 Design Force also allows for electrical analysis too. This webinar will demonstrate the features and benefits of this new design flow.

Read now
  • Webinar
Agosto 15, 2021
CR-8000 with the Ansys Electronic Desktop

This webinar will introduce the use of the Ansys Electronic Database (EDB) format to share information from CR-8000 Design Force to Ansys, the advantages beyond the former ANF-based interface, and how this can help users be more effective and productive.

Read now
  • Webinar
Agosto 13, 2021
Solving LPDDR4 Technology Design Challenges

In this presentation you will be introduced to the necessary steps in constraining and validation of LPDDR4 on the basis of a real design realized in CR-8000 Design Force right first time.

Read now
  • Webinar
Luglio 09, 2021
Digital Continuity - Engineering PDM and PLM Integration Strategy

Zuken supports a best-in-class approach to enable a flexible digitalization strategy. In this presentation we will provide an introduction of Zuken's PDM and PLM integration strategy and an overview of certified process integrations with leading PDM environments.

Watch Now
  • Webinar
Luglio 09, 2021
Defining and Implementing a Configurable Product Architecture - Webinar

A methodical approach to defining an optimal degree of variance before committing to detailed design in Zuken’s CR-8000 and E3.series.

Read now
  • Webinar
Luglio 09, 2021
PCB Design Change Workflow with CIM Database, CR-8000 and DS-CR

In this webinar, you will learn how a change request initiated in Contact Software flow through into CR-8000 and DS-CR then back to CIM Database

Watch Now
  • Webinar
Giugno 23, 2021
CR-8000: Creepage checking secondo gli standard IPC

Con CR-8000 Design Force 3D il check creepage ci permette di controllare che i vincoli di isolamento tengano conto delle cave nel circuito stampato in maniera chiara, veloce ed efficace.

Guarda ora
  • Webinar
Maggio 04, 2021
Engineering Requirements of IoT Devices

In recent years, the design of Internet of Things products became a major topic of interest. But mostly when discussing IoT aspects, the focus is on the software/application and the business-model side, neglecting the fact that PCBs are the core of - almost - every IoT device, with dedicated requirements for the design and analysis process.

Read now
  • Webinar
Settembre 14, 2020
EMC for PCB Designers

In this presentation, an EMC minded PCB design approach is presented, allowing designers to understand which EMC rules will apply to PCB projects and how EMC analysis capabilities can be utilized in the CAD flow to reduce the risk of EMC compliance failure once the board is manufactured.

Read now
  • Webinar
Luglio 06, 2020
Practical Signal Integrity for improved EMI Control in PCB Design

In our webinar we will provide an introduction to the challenges of signal integrity and the underlying physical effects. This will provide the basis for practical tips to address the related challenges during PCB design.

Read now
  • Webinar
Giugno 04, 2020
Constraint Specification in CR-8000

In this webinar the use of the Rule Stack Editor and Clearance Class in conjunction with the Constraint Browser will be explained step by step.

Read now
  • Webinar
Novembre 18, 2019
How to be First to Market with DDR5!

DDR5 is the latest generation of memory. In this joint webinar with Keysight Technologies, we’ll begin with pre-layout simulation, then transition to CR-8000. The design will then be verified by Electromagnetic (EM) simulation and system simulations in Keysight ADS, in order to build confidence in the final DDR5 design.

Read now
  • Webinar
Aprile 25, 2019
Integrità pratica del segnale per un migliore controllo EMI nella progettazione di PCB
Webinar, Design Force, Simulazione e Analisi
  • Webinar
Dicembre 12, 2018
Rilasciare il tuo progetto su PLM è più complicato di quanto pensassi
Webinar, DS-CR, DS-2