Resources by
 Case Study
Brochure Case Study Datasheet Press Release Software Software Evaluation Software Viewer Webinar White Paper

Stay on the leading edge of PCB, electrical and data management technologies

28 results found
  • Case Study
octobre 04, 2021
INORCOAT

The start-up company INORCOAT relies on Zuken’s E3.series for the development of environmentally friendly nanotechnology coating systems. INORCOAT’s first system was recently put into operation at the Portuguese National Bank for the coating of dies for euro coins.

Read now
  • Case Study
juin 30, 2020
ONTEC

ONTEC faced a difficult challenge: develop a multimedia broadcasting product while complying with a customer’s electromagnetic interference requirements, all within a tight development schedule. ONTEC used Zuken’s CR-8000 with Keysight’s ADS (including SiPro) to meet the requirements of the challenge

Read now
  • Case Study
mars 13, 2020
Hydro-Québec
Case Study, E3.cable
  • Case Study
janvier 14, 2020
dB Broadcast
Case Study
  • Case Study
janvier 14, 2020
Electroflight

As part of the Accelerating the Electrification of Flight (ACCEL) research initiative, Electroflight is aiming to set a new world speed record of more than 300mph for an all-electric aircraft, involving the creation of one of the most power dense flying battery packs in the world.

Read now
  • Case Study
novembre 25, 2019
Testimonials - CR-8000

Un recueil de témoignages de clients CR-8000 satisfaits

Read now
Un recueil de témoignages de clients CR-8000 satisfaits
  • Case Study
novembre 25, 2019
Testimonials - E3.series

Une collection de témoignages de clients satisfaits E3.series

Read now
Une collection de témoignages de clients satisfaits E3.series
  • Case Study
février 15, 2019
Olivetti
Case Study, Olivetti
introduces complex, IoT-enabled products with confidence by switching to CADSTAR
  • Case Study
décembre 19, 2018
Renishaw
Case Study, Renishaw, Design Force, Dessiner et Construire en toute liberté, ECAD/MCAD Integration, Multi-disciplinary collaboration, Augmenter la productivité, Verification and Validation
Better fit and impedance control for complex flexible PCBs in metrology instruments.
  • Case Study
novembre 22, 2018
Weidmüller
Case Study, Weidmüller, Assurer la réactivité de l’entreprise, Electro-Mechanical Cabinet Design, Gestion de la configuration
Upto 75% reduction in cabinet engineering.
  • Case Study
novembre 22, 2018
Kässbohrer Transport Technik
Case Study, Kässbohrer Transport Technnik, E3.cable, E3.panel, E3.formboard
achieves 60-90% reduction in electrical documentation turnaround for customer specific vehicle configurations
  • Case Study
novembre 22, 2018
Kellenberger
Case Study, Kellenberger, Options and Variants, Manufacturing and Service Documentation
~90% time saving to generate customer-specific schematics by implementing options and variants in E³.series.
  • Case Study
novembre 22, 2018
Bruker
Case Study, Bruker, E3.cable, Multi-disciplinary collaboration, Manufacturing and Service Documentation
raises documentation quality and design flow efficiency for precision instrumentation with E3.series.
  • Case Study
novembre 21, 2018
Stone Aerospace
Case Study, Stone Aerospace, Augmenter la productivité, Réduction du coût total des produits, Contrôle de la qualité par l’automatisation et la vérification
Reduce cabling design time by 12 weeks through using E3.series
  • Case Study
novembre 21, 2018
Emergency One
Case Study, Emergency One, E3.cable, E3.formboard, Wire Harness Engineering, Construction modulaire
controls wire harness design complexity and slashes delivery lead times by using a digital design process.
  • Case Study
novembre 21, 2018
ATK
Case Study, ATK, Augmenter la productivité, Contrôle de la qualité par l’automatisation et la vérification, 3rd Party Integration
increases cable design productivity for space shuttle booster replacement by moving to a digital design process.