RF Verification flow

AWR and Zuken announce RF verification flow for PCB design

SANTA CLARA, Calif., DESIGNCON 2013— AWR Corporation, the innovation leader in high-frequency EDA software, together with Zuken, a leading provider of electrical and electronic engineering software solutions, today announce AWR Connected™ for Zuken. This RF printed circuit board (PCB) verification flow simplifies the PCB design process and therefore shortens design cycles by enabling users to quickly and easily simulate and verify embedded RF functionality. AWR Connected for Zuken provides a pathway from Zuken’s CR-8000 Design Force PCB design software into AWR’s Microwave Office® high-frequency simulation software.

The new interface enables an intelligent, collaborative design flow for RF design and verification on the PCB. Users now have flexibility to bring in an entire design, or select specific RF signals and other design structures to conduct electromagnetic analysis. This saves time and effort for users who work with non-intelligent conductive data formats by eliminating the need to remodel before simulating.

awr-logo-900-300x102The solution works by extracting user-specified data from the Zuken platform, generating a 3Di file output, and then importing the 3Di data into Microwave Office for further electromagnetic (EM) simulation with any one of AWR’s solutions: ACE™ automated circuit extraction, AXIEM® 3D planar EM analysis, or Analyst™ 3D finite element method (FEM) EM analysis.

CR-8000 Design Force - AWR Microwave Office Integration

Play 4:02

For demonstrations of the AWR Connected for Zuken PCB design flow tool, stop by the AWR/National Instruments booth #707, or the Zuken booth #624 at DesignCon 2013, being held January 29-30 at the Santa Clara Convention Center, Santa Clara, CA.

Pricing and Availability

AWR Connected for Zuken is available immediately from AWR. CR-8000 Design Force PCB design suite is available from Zuken. Contact your local sales representative for pricing and licensing details.

About AWR

AWR, the innovation leader in high-frequency EDA software, dramatically reduces development time and cost for products employed in wireless, high-speed wired, broadband, aerospace and defense, and electro-optical applications.

Visit AWR at: AWR.TVAWR BlogsFacebookTwitterYouTube, and LinkedIn.

© Copyright 2013 AWR Corporation. All rights reserved. AWR is a National Instruments Company. AWR, AXIEM, and Microwave Office are registered trademarks and the AWR logo, AWR Connected, ACE and Analyst are trademarks of AWR Corporation. Other product and company names listed are trademarks or trade names of their respective companies.

Related stories
  • Webinar
Luglio 28, 2022
Zuken DS-CR shared Design

Con l’aumento della complessità dei progetti elettronici, la necessaria specializzazione dei progettisti e la loro distribuzione nel territorio, diventa fondamentale la progettazione concorrente con la condivisione dei database di progetto. Zuken DS-CR offre al possibilità controllata di gestire questo tipo di progettazione condivisa.

Guarda ora
  • Comunicato Stampa
Dicembre 14, 2021
SAP Certifies Zuken Interface for S/4HANA

The integration enables data and metadata generated in Zuken’s systems to be used in company-wide business processes managed in SAP, such as concurrent engineering, module management, configuration management, component management as well as change and release management. 

Read now
  • Comunicato Stampa
Novembre 02, 2021
Panasonic et Zuken concluent un accord pour la conception de produits électroniques

La Imaging Business Unit di Panasonic sceglie Zuken come partner di progettazione con un ordine di 150 milioni di JPY per la progettazione elettronica e la gestione dei dati. L'obiettivo è quello di migliorare l'uso a livello di gruppo delle informazioni sui componenti e dei dati di sviluppo dei prodotti al fine di condividere dati, componenti e tecnologie.

Read now
  • Webinar
Settembre 07, 2021
CR-8000 Mechanical Collaboration

In ambito mechatronico non è più sufficiente importare i vincoli di Progetto con Dxf, Idf, IDX che sono file intermedi. Con CR-8000 Design Force è possible la creazione della board e dei suoi vincoli dal formato native del disegno meccanico.

Guarda ora