Con l’aumento della complessità dei progetti elettronici, la necessaria specializzazione dei progettisti e la loro distribuzione nel territorio, diventa fondamentale la progettazione concorrente con la condivisione dei database di progetto. Zuken DS-CR offre al possibilità controllata di gestire questo tipo di progettazione condivisa.

In ambito mechatronico non è più sufficiente importare i vincoli di Progetto con Dxf, Idf, IDX che sono file intermedi. Con CR-8000 Design Force è possible la creazione della board e dei suoi vincoli dal formato native del disegno meccanico.

In this webinar you will see how Design for Test (DfT) using TestWay from Aster Technologies can be integrated into a CR-8000 design flow to allow users to analyze their design at each stage of the design to delivery workflow, avoiding the traditional problems associated with traditional post-layout testing, prior to transfer of the CAD data to production.

The typical design flow for a power module is in MCAD, where only structural analysis is possible. Moving to a new design flow using CR-8000 Design Force also allows for electrical analysis too. This webinar will demonstrate the features and benefits of this new design flow.

As more organizations look to move their engineering IT to the cloud, we will present our essential guidelines and lessons learned to help you define your strategy to achieve your desired goals and plan for a sustainable migration.

This webinar will introduce the use of the Ansys Electronic Database (EDB) format to share information from CR-8000 Design Force to Ansys, the advantages beyond the former ANF-based interface, and how this can help users be more effective and productive.

In this presentation you will be introduced to the necessary steps in constraining and validation of LPDDR4 on the basis of a real design realized in CR-8000 Design Force right first time.

Zuken supports a best-in-class approach to enable a flexible digitalization strategy. In this presentation we will provide an introduction of Zuken's PDM and PLM integration strategy and an overview of certified process integrations with leading PDM environments.

In this webinar, you will learn how a change request initiated in Contact Software flow through into CR-8000 and DS-CR then back to CIM Database

Con CR-8000 Design Force 3D il check creepage ci permette di controllare che i vincoli di isolamento tengano conto delle cave nel circuito stampato in maniera chiara, veloce ed efficace.

In recent years, the design of Internet of Things products became a major topic of interest. But mostly when discussing IoT aspects, the focus is on the software/application and the business-model side, neglecting the fact that PCBs are the core of - almost - every IoT device, with dedicated requirements for the design and analysis process.

In this presentation, an EMC minded PCB design approach is presented, allowing designers to understand which EMC rules will apply to PCB projects and how EMC analysis capabilities can be utilized in the CAD flow to reduce the risk of EMC compliance failure once the board is manufactured.

In our webinar we will provide an introduction to the challenges of signal integrity and the underlying physical effects. This will provide the basis for practical tips to address the related challenges during PCB design.

In this webinar the use of the Rule Stack Editor and Clearance Class in conjunction with the Constraint Browser will be explained step by step.

DDR5 is the latest generation of memory. In this joint webinar with Keysight Technologies, we’ll begin with pre-layout simulation, then transition to CR-8000. The design will then be verified by Electromagnetic (EM) simulation and system simulations in Keysight ADS, in order to build confidence in the final DDR5 design.