Resources by

Stay on the leading edge of PCB, electrical and data management technologies

110 results found
wires-spark-600px-510x310
  • Webinar
November 29, 2018
Wire Harness Design Automation Basics 2

This webinar follows our first webinar “Wire Harness Design Automation Basics I” where we have seen the logical part of the design process. Now we will look at the physical part of the wire harness design process.

WATCH NOW
e3-wire-600px-510x207
  • Webinar
November 29, 2018
Wire Harness Design Automation Basics I

This webinar covers the logical part of the wire harness design process consisting of creating the wiring diagram and the topology design.

WATCH NOW
Smart Cabinet Building Initiative – Staying Competitive in a Global Market
  • Case Study
November 22, 2018
Weidmüller

The Weidmüller Configurator (WMC) developed in a three-year collaboration with Zuken, alongside the Klippon Connect® series of terminal blocks. can streamline the process of selecting, planning and ordering terminal rail components enhancing the efficiency in the engineering process by up to 75%.

Read now
Upto 75% reduction in cabinet engineering.
Kaessbohrer-Autotransporter
  • Case Study
November 22, 2018
Kässbohrer Transport Technik

The Austrian manufacturer of vehicle Transporters, Kässbohrer Transport Technik, achieved a substantial improvement in process reliability in the generation of individualized assembly instructions and schematic documentation by implementing E3.series. Turnaround cycles for special projects were reduced by 60 to 90%.

Read now
achieves 60-90% reduction in electrical documentation turnaround for customer specific vehicle configurations
Kellenberger-varia-offen-510x310
  • Case Study
November 22, 2018
Kellenberger

Kellenberger develops and produces numerically-controlled precision grinding machines and systems for sectors such as automotive, medical devices and industrial machinery. The Swiss-based manufacturer recently introduced Zuken’s E3.series to automate the generation of schematics for customer-specific machine configurations, cutting the time taken by more than 90%.

Read now
~90% time saving to generate customer-specific schematics by implementing options and variants in E³.series.
Bruker-s8-lion-feature-510x310
  • Case Study
November 22, 2018
Bruker

To improve the quality of its electrical documents such as wiring diagrams, and to raise its design efficiency, Bruker AXS GmbH Karlsruhe implemented Zuken’s E3.series at all stages. The manufacturer of X-ray analysis systems uses E3.series from concept and production to service.

Read now
raises documentation quality and design flow efficiency for precision instrumentation with E3.series.
Stone Aerospace - Testing Autonomous Underwater Vehicle
  • Case Study
November 21, 2018
Stone Aerospace

Stone Aerospace faced the pressure of a tight schedule in designing a one-of-a-kind underwater autonomous vehicle (AUV). The time needed to design the wiring harness for the AUV was reduced by around 12 weeks and $20,000 was saved by using E3.series to automate many aspects of the design process, while integrating the logical and physical design on a single platform.

Read now
Reduce cabling design time by 12 weeks through using E3.series
EmergencyOne-fire-engine-510x310
  • Case Study
November 21, 2018
Emergency One

Specialist fire rescue and emergency vehicle manufacturer, Emergency One UK Ltd, uses E3.series software for its electrical harness design. This has enabled the company to produce wire harnesses to standardize the design and manufacturing process reaping, cost savings and reliability benefits, while also delivering flexibility through modular based customization.

Read now
controls wire harness design complexity and slashes delivery lead times by using a digital design process.
ATK-MCAD2-510x310
  • Case Study
November 21, 2018
ATK

ATK was tasked by NASA with designing the wiring harnesses for the booster rockets powering the replacement for the Space Shuttle while employing a team that is significantly smaller than that used on the now-cancelled Ares I project. ATK accomplished its mission by using E3.series to substantially increase productivity, while eliminating the need for a physical mock-up and costly test lab.

Read now
increases cable design productivity for space shuttle booster replacement by moving to a digital design process.
Arm-Automation-Closeup-of-panel-feature-510x310
  • Case Study
November 21, 2018
ARM Automation

ARM Automation designs, builds and supports custom automated manufacturing systems for a wide range of industries. The electrical design of these systems can be complex, running up to several hundred drawing sheets. Using E3.series intelligent schematics to drive the electrical design process, the company has reduced their development time by two-thirds.

Read now
achieves two-thirds electrical design time reduction and increases project ROI.
Alstom-CORADIA-Continental-für-Augsburg-510x310
  • Case Study
November 21, 2018
Alstom is adopting new modular methodology for electrical design

After acquiring various companies around the globe in the 1990s, Alstom needed to integrate new elements into its international corporate structure in order to improve productivity and planning. This also meant creating a standardized software landscape that would cover all divisions of the group.

Read now
Alstom improves productivity and planning by adopting a modular methodology for electrical design.
PRZ0510-Zuken-CADENAS-ECADPORT-1-1000px-510x310
  • Press Release
November 20, 2018
CADENAS libraries for E3.series
Press Release, Zuken Component Cloud for E3.series, Control Quality Through Automation and Verification, Manufacturing and Service Documentation
mueller-martini-Alegro_Schrank-510x310
  • Case Study
November 15, 2018
Müller Martini

Müller Martini supplies highly flexible, customized print processing machines to the graphics industry. The Swiss-based company recently took the replacement of an end-of-life CAD installation as an opportunity to re-engineer established procedures in electrical engineering and handover to production.

Read now
enhances variant and option handling and reduces manufacturing costs by moving to an object-oriented ECAD environment.
Mecalac
  • Case Study
November 15, 2018
Mecalac

Mecalac designs and manufactures heavy plant vehicles for use in construction. Their vehicles – backhoe loaders, site dumpers and compaction rollers – are each offered in several variants. They all need to work in harsh environments.

Read now
cuts the time taken to develop right-first-time cable harnesses for its heavy plant vehicles.
Pantec-RHINO-II-machine-510x310
  • Case Study
November 12, 2018
Pantec Automation

When Pantec Automation’s customers faced pressure from low-cost counterfeit machinery, they realised the best way to fight back was to help customers reduce their own costs. Through wholesale efficiency improvements achieved by expanding its use of Zuken’s E3.series and integrating it into its ERP/PPS, Pantec Automation enabled its customers to better serve end-users.

Read now
cuts machine manufacturing turnaround time by around 50%, reduces product costs, and helps protect IP for its customers.
BCA-Leisure-Test-510x310
  • Case Study
November 08, 2018
BCA Leisure

BCA Leisure designs and manufactures mixed power cable harnesses for almost every UK-based OEM of caravans and motorhomes. The company has been using E3.series for a number of years and recently started using E3.cable, part of Zuken’s E3.series suite, which is now heavily relied upon during the development of 100+ different prototype harnesses each year. This is followed by provision of detailed production drawings to the shop floor.

Read Now
Using E3.series to design and manufacture cable harnesses for caravans and motorhomes