CR-5000 Training

Scheduled Training Courses

Below are details of CR-5000 training courses that are currently scheduled. If you would like to participate in one of the listed courses, please contact the local training co-ordinator as stated below, and also within the Terms & Conditions for the territory running the course.

• France
• Germany
• Italy
• UK
• USA

On-Demand Training

If you would like to participate in a CR-5000 training course, but it is not currently listed within the schedule below, please contact your local training co-ordinator, details can be found underneath each table below and also within the Terms & Conditions page for the required territory.

On-Site & Customized Training

In addition to the standard scheduled courses listed within our Course Index, we can provide customized and on-site training tailored to suit your requirements.  Please contact your local Zuken Representative for more details.

France

Pour plus d'information

• Contact : info-france@zuken.fr
• ou téléphoner au (33) 01 69 29 48 00
• Terms & Conditions

↑ Back to Top

Germany

Contact

• Contact: Tina.Maass@zuken.com
• or call +49 89-607 696 21
• Fax-Anfrage - Word Doc
• Terms & Conditions

↑ Back to Top

Italy

Contact

• Siete pregati di prendere contatto con la Signora Barone tramite e-mail a: anna.barone@zuken.it
• Tel. +39 02575921
• Terms & Conditions

↑ Back to Top

UK

Contact

• training@zuken.co.uk
• or call 01454 207804
• Terms & Conditions

↑ Back to Top

USA

Contact

• sandy.jones@zuken.com or usa.training@zuken.com
• or call us at 800-447-7332
• Terms & Conditions

↑ Back to Top

Products

• New Design Technologies
• PCB Design
  • CR-8000
    • Overview
    • System Planner
    • Design Gateway
    • Design Force
    • DFM Center
    • Where to buy
    • Downloads
      • Webinar: System Planner
      • Webinar: Design Gateway
    • Contact CR-8000
  • CR-5000
    • CR-5000 Rev 13 - What's New
    • Overview
      • CR-5000 Lifespan
      • If you want...
    • System Design
      • Design Creation
      • Constraints Manager
      • Parallel System Design and Analysis
      • FPGA and PCB Co-Design
      • Design Re-Use
    • Physical Design
      • Layout, Placement & Routing
        • Board Designer
        • Dragon Router
        • Lightning P.R.Editor
        • Board Designer Tools
      • Library Tools
        • Components Manager
        • Library Tools
      • Design Variant Management
      • Documentation
    • Analysis & Verification
      • Concurrent Design & Verification
        • Analog Simulation & Verification
        • Lightning
        • Lightning Tools
        • RF Design & Verification
      • Power Integrity & EMC Verification
        • Concurrent Power Integrity and EMI Analysis for PCB Design
        • EMC Adviser
      • Parallel Mechanical & PCB Design
        • Dassault Systèmes: CATIA V5
        • Siemens PLM: NX
        • Other MCAD Systems
    • Manufacturing
      • Advanced Design Rule Checks
      • Production Preparation
      • Production
    • Data Management
      • Engineering data management Platform Suite (EPS)
        • Component Master
        • EDA Library Master
        • Component List Master
        • Managing Design Data and Documents
      • Version & Revision Management
        • Component Version & Revision Management
        • Library Version & Revision Management
        • BOM Version & Revision Management
        • Design Data Version & Revision Management
        • Multiple CR-5000 Library Version & Revision Management
      • Change Management
        • Component Change Management
        • Library Change Management
        • BOM Change Management
        • Design Data Change Management
        • Obsolescence Management / Analysis
      • History Management
        • Component History Management
        • Library History Management
        • BOM History Management
        • Document History Management
      • Analysis & Verification
        • Component Analysis
        • Library Analysis
        • Where – Used Analysis
        • Second Source Analysis
        • Supplier Analysis
        • BOM Analysis
        • Variation & Destination Analysis
        • 4 Point Comparison
        • Failure Mode & Effect Analysis (FMEA)
        • Preferred Parts List Analysis (PPL)
        • Design Data Analysis
      • 3rd Party Integration
        • ERP / MRP / PDM Integration
        • SAP R/3 certified Integration
    • Technology Network
      • Aldec
      • Altera
      • Ansoft
      • Dassault Systemes
      • Mentor Graphics
      • Synopsys
      • Tecnomatix Technologies, Ltd.
      • Texas Instruments
    • Training
      • Scheduled Training
      • Course Index
        • CR-5000 Administration
        • CR-5000 Library
        • CR-5000 System Designer
        • Design Gateway
        • Design Gateway e-Training
        • CR-5000 Dragon Routing Platform
        • CR-5000 Lightning Scenario / Realize
        • CR-5000 Board Designer
        • CR-5000 Lightning P.R.Editor
        • High-Speed Design Methodology
        • IBIS Modelling
        • High-Speed & Signal Integrity Basics
        • EMC Basics
      • Terms & Conditions
        • France
        • Germany
        • Italy
        • UK
        • USA
    • Design Bureaux
    • Where to buy
    • Downloads
      • Board Designer Viewer
        • Security of Design Data
        • License Agreement
      • Webinar: Design Gateway
      • Webinar: Bridging the Gap Between Electronic and Mechanical Design
      • IBIS Modeling Tools
        • Third Party Modeling Tools / Links
      • Simulation Models
      • FPGA Design Kits
    • Contact CR-5000
  • CADSTAR
    • European Bundles
      • Lite
      • Dynamic
      • Kynetic
    • American Bundles
      • Lite
      • Basic
      • Professional
      • Extreme
    • CADSTAR 13.0
    • What's New
      • CADSTAR 13.0
      • CADSTAR 12.1
      • CADSTAR 12.0
      • CADSTAR 11.0
      • CADSTAR 10.0
      • CADSTAR 9.0
    • Overview
      • If you want...
      • Maintenance
    • System Design
      • Constraint Browser
      • Schematic Design
      • CADSTAR E³.logic
      • CADSTAR FPGA
      • Variant Management
      • Floor Planning
      • Library Tools
        • Online Libraries
    • Physical Design
      • PCB Layout
      • Placement & Routing
        • Interactive Routing
        • High-Speed Routing
        • Autorouting
          • Dragon Router
      • IDF Interface
      • Board Modeler Lite
      • Variant Management
    • Analysis & Verification
      • Power Integrity Advance
      • SI Verify
      • EMC Adviser
    • Manufacturing
      • Advanced Design Rule Checks
      • Manufacturing Output
    • Migration Tool
      • Request Demonstration
    • Technology Network
      • Aldec
    • Training
      • Scheduled Training
      • Course Index
        • Essentials (SCM & PCB)
        • Schematics
        • PCB Layout Workshop
        • PR Editor XR 2000
        • PR Editor XR 2000 HS
        • SI Verify
        • CADSTAR 3D
    • Design Bureaux
    • Where to buy
    • Request authorisation
    • Downloads
      • CADSTAR Express
        • CADSTAR Online Libraries - Sample Parts Library
      • CADSTAR FPGA
      • CADSTAR Design Viewer
      • Movies
      • Download Help & Assistance
    • Contact CADSTAR
  • A-Z of PCB Products
• Electrical & Wire Harness Design
• Library & Data Management
• Support